ttt

 

ttt

 

I'm going to take a guess and say if you can hook good you should go 11.0 - 11.3 at around 120-123 mph. Just my guess.

 

My guess would be in the 10.9x range with some bite off the line. I run 11.85@ 115 with free mods,drag radials and 150 horse wet kit(Nothing else). with the convertor,headers,y-pipe,cat back and the minor suspension work i think you can get 10's. Go run and let us know how it goes. Good luck!

<small>[ February 16, 2003, 10:38 PM: Message edited by: redsscamaroboy ]</small>

 

I have a full wieght '02 SS A4, with free mods, MTI lid, msd wires, mac headers & ORY w/ Flowmaster collecter, Borla wide open, vig, 3600, TNT 150 shot, BMR LCA's and Drops, BMR panhard rod, Hotchkis SFC, Hotchkis Strut Tower, E.T. Streets and Runners, Spin bad on Launch even @ 10 p.s.i..... no comp. tune, 3.23 gear, no internals, overall stock car, what should it run, spraying between 3000-5800.

 

If you could hook, high 10's.
Good luck!

Jeffrey

 

Well thats what I thought too. But unfortunatley the damn thing ran a best of 11.50 with the spinning problem. So what am I doing wrong? Does it need a computer tune, or does it need wieght reduction? Please help. It has no MPH as opposed to before the converter!

 

if you post your times that would help people figure out what is needed to help you. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> need times and mph. 60ft,1/8th time and mph etc.

<small>[ February 18, 2003, 08:15 PM: Message edited by: redsscamaroboy ]</small>