Looking at nx proton kit
Thread Starter
Staging Lane
Joined: Oct 2014
Posts: 54
Likes: 2
On another note what is everyone paying for nitrous? One guy quoted me $60 to fill my bottle but that seems high to me??
Thread Starter
Staging Lane
Joined: Oct 2014
Posts: 54
Likes: 2
http://www.summitracing.com/parts/no...3nos/overview/
Will this work on a piranha nozzle? Remember this is a turbo engine with 3" tubing going into the tb. Think I need to get the nozzle as close to center of the pipe as possible? Or should I go to the hardware store and find something that will work? The threads on the piranha are 1/8" npt correct?
Don't have a tig welder that will weld aluminum so weld on bung is not an option (although I know that'd be the best route).
Will this work on a piranha nozzle? Remember this is a turbo engine with 3" tubing going into the tb. Think I need to get the nozzle as close to center of the pipe as possible? Or should I go to the hardware store and find something that will work? The threads on the piranha are 1/8" npt correct?
Don't have a tig welder that will weld aluminum so weld on bung is not an option (although I know that'd be the best route).
Ls1tech & Truck Sponsor
iTrader: (4)
Joined: Jun 2010
Posts: 2,267
Likes: 1
From: Wichita falls Texas
http://www.summitracing.com/parts/no...3nos/overview/
Will this work on a piranha nozzle? Remember this is a turbo engine with 3" tubing going into the tb. Think I need to get the nozzle as close to center of the pipe as possible? Or should I go to the hardware store and find something that will work? The threads on the piranha are 1/8" npt correct?
Don't have a tig welder that will weld aluminum so weld on bung is not an option (although I know that'd be the best route).
Will this work on a piranha nozzle? Remember this is a turbo engine with 3" tubing going into the tb. Think I need to get the nozzle as close to center of the pipe as possible? Or should I go to the hardware store and find something that will work? The threads on the piranha are 1/8" npt correct?
Don't have a tig welder that will weld aluminum so weld on bung is not an option (although I know that'd be the best route).
Thanks,
Garrett
Ls1tech & Truck Sponsor
iTrader: (4)
Joined: Jun 2010
Posts: 2,267
Likes: 1
From: Wichita falls Texas
You really need to have at least this much of the nozzle protruding. Either tap the pipe itself or keep on grinding! If you don't have it sticking out enough you could generate reversion and thats a no-no.
Thanks,
Garrett
Thanks,
Garrett
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Thread Starter
Staging Lane
Joined: Oct 2014
Posts: 54
Likes: 2
So you don't think the nozzle protrudes through the pipe enough? I guess I could grind down the piece of brass inside the pipe to give it a little more clearance? I'm surprised you'll don't offer a bung for this nozzle. Don't think drilling and tapping for the nozzle is an option for me because I want a clean look and not have to worry with boost leaks. Maybe I should bench test it and make a video to post on here.
Ls1tech & Truck Sponsor
iTrader: (4)
Joined: Jun 2010
Posts: 2,267
Likes: 1
From: Wichita falls Texas
As long as the bathtub is flush or sticking past a little then you should be fine.
From the pic it looks like your very close to being good to go.
This is ideal....
-Chris
From the pic it looks like your very close to being good to go.
This is ideal....
-Chris
hey chris, i just bought the proton fly by wire system - is there a generic
purge set up that will work with the kit, or do i need to purchase part #
15600 so it matches up ?
appreciate the help.
purge set up that will work with the kit, or do i need to purchase part #
15600 so it matches up ?
appreciate the help.
Ls1tech & Truck Sponsor
iTrader: (4)
Joined: Jun 2010
Posts: 2,267
Likes: 1
From: Wichita falls Texas
Thanks,
Garrett
Registered User
Joined: Sep 2019
Posts: 2
Likes: 0
Absolutely. You can run that system as dry. We also have a dry system for around the same price that includes the upgraded lightning solenoid. The proton box basically just houses the 2 solenoids inside.
Here is a link to that dry system, let me know if you need forum pricing on these items.
http://www.nitrousexpress.com/21000-...lb-bottle.html
Thanks,
Garrett
Here is a link to that dry system, let me know if you need forum pricing on these items.
http://www.nitrousexpress.com/21000-...lb-bottle.html
Thanks,
Garrett