how much nitrous can stock ls1 injectors support?

 

Depends on the other mods

 

long tubes ls6 intake basic bolt ons

 

Back in the day I sprayed 200+hp on a basic bolt-on 01 WS.6 with no problems on the injector side of it but that's with a wet setup.


For a dry setup I've seen and had customers spray up to around 150hp on the factory injectors.

-Chris

 

Sorry guys figured I would just use this thread instead of starting a new one. I am kind of in the same boat my car is an a4 car with full bolt-ons, hotcam and ls6 intake. will the stock injectors support a 100 dry shot?

 

I've seen some setups be fine on the 100hp shot but on the other side I've seen some setups max out the injectors on this kind of setup.

Do you currently know what the duty cycle of the injectors is right now?


-Chris

 

Unfortunately I do not since the car was tuned using one of our mail order tuning sponsors. I will assume it is best for me to go ahead and upgrade them to some 36lb injectors before spraying the car though.

 

I hear ya and that would take care of the just in case scenario.

-Chris