Lets see your bays
Thread Starter
Joined: Jun 2009
Posts: 363
Likes: 1
From: San Antonio, TX
Lets see your bays Im in the middle of plumbing in my nitrous/fuel. Im running a Gemini plate as well as a fogger setup by Nitrous Outlet. Im going to run -6 to my fogger and -4 to the plate off 2 bottles.
My request is: can you guys post pictures of your engine bays? I would like to see how similar people have routed their lines and what not. Mine is a carb swapped forged 383 on E85. It will be jetted for a 250 on the DP and 100 on the plate, with the optional 3rd kit on a controller. My plate is off for setting up the carb
My request is: can you guys post pictures of your engine bays? I would like to see how similar people have routed their lines and what not. Mine is a carb swapped forged 383 on E85. It will be jetted for a 250 on the DP and 100 on the plate, with the optional 3rd kit on a controller. My plate is off for setting up the carb
Ls1tech & Truck Sponsor
iTrader: (4)
Joined: Jun 2010
Posts: 2,267
Likes: 1
From: Wichita falls Texas
Thanks,
Garrett
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Launching!
Joined: Dec 2014
Posts: 214
Likes: 0
From: Florida
Im in the middle of plumbing in my nitrous/fuel. Im running a Gemini plate as well as a fogger setup by Nitrous Outlet. Im going to run -6 to my fogger and -4 to the plate off 2 bottles.
My request is: can you guys post pictures of your engine bays? I would like to see how similar people have routed their lines and what not. Mine is a carb swapped forged 383 on E85. It will be jetted for a 250 on the DP and 100 on the plate, with the optional 3rd kit on a controller. My plate is off for setting up the carb
My request is: can you guys post pictures of your engine bays? I would like to see how similar people have routed their lines and what not. Mine is a carb swapped forged 383 on E85. It will be jetted for a 250 on the DP and 100 on the plate, with the optional 3rd kit on a controller. My plate is off for setting up the carb
Thread Starter
Joined: Jun 2009
Posts: 363
Likes: 1
From: San Antonio, TX
awesome thanks guys! I was hoping to see more standalones and how you guys are routing your pumps. im really trying hard to keep the engine bay clean but having to add more lines and **** is bugging me lol.
Hey bro, I'm in the same boat. Buts Roberts stand alone is clean, I bought a nx plasit stand alone but was having a hard time to fit it in my engine bay ( 96 mustang ) so I bought a metal one with 2 pumps inside for cheep and looks better for fitment. What one are you using ?
Staging Lane
Joined: Mar 2014
Posts: 81
Likes: 0
From: Southern IL
1 gal stand alone on 7 psi with Nitrous Outlet plate. Progressive and 2 tanks in trunk just for the fun of it. Not finished yet but getting close.
Last edited by 95TAVERT; Apr 29, 2015 at 11:21 PM.
Hey bro, I'm in the same boat. Buts Roberts stand alone is clean, I bought a nx plasit stand alone but was having a hard time to fit it in my engine bay ( 96 mustang ) so I bought a metal one with 2 pumps inside for cheep and looks better for fitment. What one are you using ?