When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
All new nitrous outlet product!!! Pro wiring harness!!
Here at Nitrous Outlet, we've always wanted to give our customers more- and now we've gone above and beyond the other companies out there. We are excited to announce that we are now offering pre-built wiring harnesses for your application! The harness will come with your kit in a plug-and-play format. All you'll have to do is run the harness and plug in the connectors and you're completely wired up. Pricing starts at $399, and the harness will be wired for the following:
Switch Panel
2 stages of Nitrous
Bottle Heater
Remote Opener
LNC2000/2001
Dedicated Fuel System
NOS Mini Controller or the Nitrous Outlet Controller (when it becomes available)
For more information or pricing, send me an email to andy@nitrousoutlet.com or give me a call at 254-848-4300 Ext. 104
I think that a lot of times the wiring needed to install a nitrous kit properly scares people off.
You can say that again. I've remember when I was looking into a nitrous kit a few years ago. I even believe I asked a few vendors if they had a complete wiring harness that would encompass everything, but no one had anything like that at the time. As long as it's reasonably priced, I think you'll sell the **** out of them.
I think the wiring does scare a bunch of people out of using nitrous. In fact, most of the tech calls we get here in the office are about wiring, or diagnosing problems that come back to wiring. I really hope that this will open the doors for easier and more reliable use for both new and old users alike.
As far as the controller goes- I'll have more information later, but I promise, you'll all love it!
Last edited by AJatNitrousOutlet; 12-16-2015 at 04:40 PM.
this is a gift from god, im sick of wiring. Are these built to order? can they be customized per application?
Yes sir, they can be! All you have to do is give us a call so we can get information about your setup, and we can build it to order! Build time is about 2 weeks out at the moment-
Yes sir, they can be! All you have to do is give us a call so we can get information about your setup, and we can build it to order! Build time is about 2 weeks out at the moment-
thats awesome, ill definitely be in touch when my build is ready!
The Holley systems have their own harnesses, and honestly I'd stick with them. If you're needing something beyond that I may be able to help, or send you to one of our dealers who are local to you that can help. If you need anything feel free to give us a call!
12-16-2015, 03:18 PM
All new nitrous outlet product!!! Pro wiring harness!! 
