So I'm interested in getting a gauge pod pillar for my car and putting some pods in. I'm mainly doing this for safety but I admittedly like the look as well. My question is if I want to religiously monitor for issues within in the car, how many do I need? Will just 2 work? The main 2 that come to mind is a fuel pressure gauge and a wideband.

How much of a pain are these things to install? Thanks for any info.

 

Anyone? Is this too simple of a question? I'm just wondering if I wasn't to monitor against a lean condition, what should I be looking for? Fuel pressure and a wide band gauge are what come to mind.

I've been looking at the Innovate PSN-1 but being that I've already bought a NOS Mini and plan on purchasing a LNC 2000, it seems redundant.

 

I currently use a nitrous pressure guage and fuel pressure. I also monitor Air/fuel as well.

 

I have 3 gauges on my A pillar. Nitrous pressure, Fuel pressure, and a Wideband. I went with Dynotune Nitrous gauges for the fuel and nitrous. They are very accurate and have been extremely reliable for over a year, at a great price. For the wideband, I have an AEM UEGO. Again, very cost effective, and very accurate.

 

I have 2 gauges one is a Aeroforce Interceptor gauge with the add on fuel pressure and an Aem wideband. The interceptor reads everything from your OBD 2.

http://www.aeroforcetech.com/products_order_gm.html

 

just remember, use an isolator for the fuel. Don't want to run actual fuel to inside your car. I use 3 A/F, nitrous and fuel pressure. but it's in my glovebox

 

I have fuel pressure and wide and on my pillar (corvette) and my nitrous gauge in my ash trey with my switches

 

can we get some pictures? I'm looking for some ideas on how and where to put my gauges...I'm thinking three pillar for Nitrous pressure, fuel and Wide with my controls in my ash tray (Nitrous Outlet).
I considered the three pillar one mounts on top of the dash above the radio/air vents but I don't know how that would look on an F-body.
thanks in advanced

 

get that all in one gauge. its has afr , bottle pressure and its a window switch aswell. i run 2 on my car . a fuel pressure for my standalone and afr. im gonna be selling both of those and putting this in soon. and a diff fuel pressure gauge cause i went to low psi on the d tank. ive yet to look at either while making a pass tho.

 

In my LS-3 376/525 Cobra Kit Car I'm using SpeedHut fuel and NOS pressure gauges with low pressure waning lights! Not installed yet so no info but the set sure looks nice!


Al

 

has any one used the innovate gauge that has the wideband and the bottle pressure