Nos window switch help...
#1
Nos window switch help...
Hey guys,anyone have any advice.. my rpms are not matching my window.. do i need to be in 4cly mode if tapped off ecu? Does that make a difference?
#2
#6
On The Tree
iTrader: (7)
Join Date: Mar 2013
Location: Bucksport, Maine
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Off by 500 from the stock cluster? Not uncommon to hear that the stock cluster is around 3-500 off from a window switch, aftermarket tach, scanner or any other device reading directly from PCM.
#7
Ya 500 off the stock cluster.. I have the nos window switch, I have my tps set to 4.5 rising,but I've read to set it .2 under? So 4.3? I had my window set to 3200 on an 6500 off but for some reason it wouldn't hit?
Trending Topics
#9
First make sure your wiring is spot on. Next when your going into the unit are the lights on the left side both lighting up?
My most recent NOS window switch was faulty out of the box. Second one worked just fine.
My most recent NOS window switch was faulty out of the box. Second one worked just fine.
#10
Wiring is spot on,everything works flawlessly but the window switch.. it won't activate the solenoids.. even took the plate off an hit it with the car on in neutral.. no fuel or nitrous,btw mine has the fbody standalone[if that matters].. so I'm almost positive it's a bad brand new nos window switch.. what are the odds that both nitrous an fuel solenoids are bad? It's a brand new nitrous outlet kit..
#12
Anyone with a nos window switch have any input? I have rpms reading correct.. coming on at 3200 an off at 6500 rpm.. tps set to 4.3 rising get green light on Windows switch but doesn't activate