As the title say I need the instructions so I can install and adjust this thing. Praying somebody can help me out.

Thanks
Shawn

 

 

If your car is already tuned "DO NOT" go by these recomendations for timing. It is possible possible the tuner did not mess with the timing at the temps the Interface targets but highly unlikely. You'll need to verify what timing is being pulled for each setting before you start spraying. Also in the logs I show a .2-.3 sec delay before timing is pulled when activated so if you plan on spraying bigger shots I'd have it activated when system is armed istead of fired to be safe.

The only logs I have on my computer now are for a Ls2 maf and these are the temps im seeing for the different "degrees to retard" in the setup.
2 degrees= 103 IAT's
3 degrees= 111 IAT's
5 degrees= 122 IAT's
7 degrees= 135 IAT's
Didnt try 9 degrees because I didn't need another column.

 

Thanks a TON !!!!