What all am going to need to set-up besides the kit, and it has a heater (as in spark plugs,gap,heat range. Also this kit I am going to use is going to be off a button not a mico switch (is that going to be ok?). What else should I need or get? Should I run a window switch as well? I am only going to be running a small shot(100+125) mods are in sig. Just let me know



Thanks Dan

 

I would also like to know these answers too. TTT

 

Looking at your mods a NGK tr6 would prob. work best.Dry or a wet kit?

 

tr6 plugs and a fuel pressure safety switch (not necessary but cheap insurance)

 

It is a wet kit, what gap should the plugs be at?

 

.035 in.

 

I'm installing my kit this weekend... I got the TR6 plugs ... MSD 8969 window switch, the digital one which is a little easier to adjust... I'm going with the micro swith... And don't know if you have one or not but a pressure guage would come in handy... I am only going to run a 75 or 100 shot until I get a fuel pump (Walbro 255)... A 125 shot or higher it's a good idea... And with a good tune you should be good... Oh, and a purge is always good to clear the lines... Good luck...

 

that's a good question mainly depends on your budget but it looks like it has been sumed up for you. Good luck with the kit i'll be looking forward to see your results. Which kit are you going to go with?