Getting Ready To Go On The Bottle

Reply Subscribe

Thread Tools

Search this Thread

Nov 10, 2004 | 06:47 PM

LS1999pewterZ

Thread Starter

On The Tree

Joined: Jan 2004

Posts: 138

Likes: 0

Getting Ready To Go On The Bottle

What all am going to need to set-up besides the kit, and it has a heater (as in spark plugs,gap,heat range. Also this kit I am going to use is going to be off a button not a mico switch (is that going to be ok?). What else should I need or get? Should I run a window switch as well? I am only going to be running a small shot(100+125)

mods are in sig. Just let me know

Thanks Dan

Nov 10, 2004 | 10:00 PM

PunkNPonys

TECH Enthusiast

iTrader: (2)

Joined: Apr 2003

Posts: 703

Likes: 0

I would also like to know these answers too. TTT

Nov 10, 2004 | 10:22 PM

sr71bbjr

TECH Resident

iTrader: (52)

Joined: Jan 2004

Posts: 809

Likes: 0

From: DFW

Looking at your mods a NGK tr6 would prob. work best.Dry or a wet kit?

Nov 10, 2004 | 10:38 PM

Turo

TECH Junkie

iTrader: (23)

Joined: Aug 2003

Posts: 3,465

Likes: 0

From: Tallahassee, FL

tr6 plugs and a fuel pressure safety switch (not necessary but cheap insurance)

Nov 11, 2004 | 12:24 AM

LS1999pewterZ

Thread Starter

On The Tree

Joined: Jan 2004

Posts: 138

Likes: 0

It is a wet kit, what gap should the plugs be at?

Nov 11, 2004 | 10:23 AM

Silvette_02

TECH Apprentice

Joined: Apr 2003

Posts: 301

Likes: 0

From: Conway, SC

.035 in.

Nov 11, 2004 | 12:51 PM

BLK02Z06

On The Tree

iTrader: (1)

Joined: Jul 2004

Posts: 132

Likes: 0

From: Dallas, TX

I'm installing my kit this weekend... I got the TR6 plugs ... MSD 8969 window switch, the digital one which is a little easier to adjust... I'm going with the micro swith... And don't know if you have one or not but a pressure guage would come in handy... I am only going to run a 75 or 100 shot until I get a fuel pump (Walbro 255)... A 125 shot or higher it's a good idea... And with a good tune you should be good... Oh, and a purge is always good to clear the lines... Good luck...