SS6ixSpeed

I still have the 5177 kit from my SS and now I'd like to add it to my 03 Z06. The car has the K&N FIPK so I'm not sure where to fog in front of the MAFS. Anyone done this or have pictures? I've used the search and no luck. I'm considering drilling a single hole and injecting the nitrous through the very bottom(front) of the system. It would be aimed at the MAFS but 7-8" away. I know you aren't supposed to aim it directly at the sensor but would that distance be acceptable. Or should I drill two holes in the top and face it down and away from the MAFS. I've attached a picture of the setup. Thanks.

camaro98z28

You should just do a small 100 shot wet

SS6ixSpeed

For the time being, wet is out of the question.

B18B1LS1

iTrader: (12)

I don't have any pics but mine has two nozzles drilled in through the carbon face on the front. Works fine for me.

Robert56

iTrader: (2)

Dry is good, and I think either way would be all right. If I was doing it I'd come from the top and let the air stream turn n2o and take it along.