Nitro Dave's Nitrous Outlet

iTrader: (25)

Here is the universal NOS in kit form.

Robert56

iTrader: (2)

Yea that's the universal kit, however, the LS1 F-Body Noszle kit 08301 has single noids, so rating/capability is less than the Nitrous Direct PRO EFI (thus the reference to 300hp, rather than 400 and above), and like you said the universal should put out about the same.
Robert

Nitro Dave's Nitrous Outlet

iTrader: (25)

Cool Here is a better pick of the NX NXL kit.


Ok here is one of one of NXs universal NXLs. They have one with the black hose also.Ill have to find taht pic.

Nitro Dave's Nitrous Outlet

iTrader: (25)

Ofcourse who really is going to spray more than 250 to 300 through one of these style kits. Anything bigger needs to be a real nozzle.
Dave

Robert56

iTrader: (2)

Well it won't be me, as i have no forged bottom end, but will be attemping the 300hp hit.
Robert

Nitro Dave's Nitrous Outlet

iTrader: (25)

After attempting the 300 for a while you may be getting one soon.LOL
Dave

Bill Bowling

iTrader: (6)

Who did you get your TNT Kit from? That is the one I like.

Bill

Robert56

iTrader: (2)

Or an LS7. What I am doing is, 1st stg dry 100rwhp at 3000, then 2nd stg dry 75rwhp at 4100, and then 3rd stg DP 125rwhp at 5100 progressively to red line. Think I have a chance to live for awhile?
Robert

cantdrv65

iTrader: (3)

Why wouldnt you just spray a progressive say 300 shot?....

Robert56

iTrader: (2)

Check out the ongoing thread multi stg vs prog controller for insight. My car is like a test bed, I can run my 3rd stage as a seperate stand alone n2o system and progressed. I am a dry guy and why mess with what works, but adding the final of a big hit into the upper rpm's in progressive and wet. I like my wet to come in later and use the dry for the intitail hit, also race gas will be added in the final stage. I also have a 3rd stage dry which will also be put to the limit.
Robert

383LQ4SS

iTrader: (33)

when will you be done with that setup? I want to see some dyno charts soon dammit

Robert56

iTrader: (2)

Soon, but it's on jack stands right now for tubbing wheel wells and roll cage. We'll see if I can keep my smooth linear torque curve all the way to redline, and then live at the track.
Robert

moe00z

iTrader: (1)

NX is the only one I really know about.

1MEANGTO

I have both NX and Cold Fusion both kits work great.

WizeAss

iTrader: (5)

if a poll was conducted for simply the easiest kit to hide.... besides a cheater or sneaky pete set up.. or fogger kit.... basically one that retails for less than 750.... which would it be?

02SilverWS6

Just upgraded to the NX maf ends. Easiest install ever, with the whisper lid, it fit like a glove.

A picture for your pleasure...

Bill Bowling

iTrader: (6)

I do not have a MAF.. Do they have one for the TB?

Bill

Nitro Dave's Nitrous Outlet

iTrader: (25)

If you are not running a maff I would suggest our plate.
Dave

TRMIN8R

iTrader: (42)

I have had 2 TNT kits and the quality is top notch. Never used any other brand so I can't say which one is the best, but you won't be disappointed with TNT. NX would be my second choice though.

Bill Bowling

iTrader: (6)

What plate is that? Who makes it?
Thanks,
Bill