Soooo close to a 9 second pass....
Went out on the ET drags today...........
150 shot
1.34 ... 60'
4.07 .... 330'
6.35 ....1/8
107.6...mph
8.34... 1000'
10.02 @ 133.9
Tryin to get the video up shortly.... did a pretty good wheelie
150 shot
1.34 ... 60'
4.07 .... 330'
6.35 ....1/8
107.6...mph
8.34... 1000'
10.02 @ 133.9
Tryin to get the video up shortly.... did a pretty good wheelie
being that close would cause me to take drastic measures=clean out console,go take a whiz,anything i could think of to drop a few pounds.your 1/8 mile time is there now just need a few more horses.what is your 60 on the 325s ?
Originally Posted by slow trap
being that close would cause me to take drastic measures=clean out console,go take a whiz,anything i could think of to drop a few pounds.your 1/8 mile time is there now just need a few more horses.what is your 60 on the 325s ?
I've only made 3 N20 passes on them 1.47 was the best 1.50 and a 1.65(shut it down, spun hard)
Trending Topics
Its a forged piston stock rod short, unknown ring setup, it wasnt originally intended for his car. Think it was built for a turbo
Does any reputable place build shortblocks anymore?
Does any reputable place build shortblocks anymore?
Damn, thats close!
Its been my experience that there is some type of mysterious barrier preventing cars going from low 10's into the 9's. It usually requires replacing something major like a few transmissions, a head gasket, or maybe a rear-end or two. After that, your allowed to run single digits.
Good luck
Its been my experience that there is some type of mysterious barrier preventing cars going from low 10's into the 9's. It usually requires replacing something major like a few transmissions, a head gasket, or maybe a rear-end or two. After that, your allowed to run single digits.
Good luck
I have no personal experience with them but LME is supposed to build good stuff. I ran a 10.08@136.6 on a horrible 1.54 60ft last summer never got the 9 that day the track started going away, just keep at it and you'll be there soon enough.
Originally Posted by GrannySShifting
Does any reputable place build shortblocks anymore?
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by GrannySShifting
Its a forged piston stock rod short, unknown ring setup, it wasnt originally intended for his car. Think it was built for a turbo
Does any reputable place build shortblocks anymore?
Does any reputable place build shortblocks anymore?
did my motor along with a lot of 8,9,10,11 second cars
ranging from turbo,SC, spray, na ect ect. they do very good stuff. they are not the cheepest, but everything is done with quality!!

