my switch panel
Thread Starter
TECH Junkie
iTrader: (19)
Joined: Feb 2005
Posts: 3,155
Likes: 0
From: Sandusky, Ohio
my switch panel hey guys,
i have this burried in a thread of mine in the appearance section, but its for my nitrous setup so i wanted to show it off here.
here is a pic of my switch panel that I made.
Switch Panel Pic
its plexaglass. I painted the backside black and then CNC'ed it from the back. I'm going to use the ashtray light underneath it so it will illuminate the lettering red at night. should look pretty cool
the holes on the top are for my switches
arm is to arm nitrous,
open to open the bottle
heat for the bottle heater
the center hole, left side is for the LED to let me know my cutout is fully opened
the center hold right side is for the switch for my line lock
bottom left is for the switch for my electric cutout
bottom right is for my purge push button
i didn't really like the ones i saw forsale online, so I made this one. Plus nobody else has one like it
i have this burried in a thread of mine in the appearance section, but its for my nitrous setup so i wanted to show it off here.
here is a pic of my switch panel that I made.
Switch Panel Pic
its plexaglass. I painted the backside black and then CNC'ed it from the back. I'm going to use the ashtray light underneath it so it will illuminate the lettering red at night. should look pretty cool
the holes on the top are for my switches
arm is to arm nitrous,
open to open the bottle
heat for the bottle heater
the center hole, left side is for the LED to let me know my cutout is fully opened
the center hold right side is for the switch for my line lock
bottom left is for the switch for my electric cutout
bottom right is for my purge push button
i didn't really like the ones i saw forsale online, so I made this one. Plus nobody else has one like it
Thread Starter
TECH Junkie
iTrader: (19)
Joined: Feb 2005
Posts: 3,155
Likes: 0
From: Sandusky, Ohio
Originally Posted by 1999 SS
how well does it fit? looks sharp.
can you make anymore?
can you make anymore?
i haven't fit it yet. I think I am going to mount it to the ashtray, and cut off the bottom of the ashtray to run the wires through. (so i'm looking for a spare ashtray if anyone has one)
probably wont have it all wired up until december since i'm heading for school soon
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Back light that ****, maybe blue led's...that would look sick
I just re-read your first post... you mentioned lighting it with the ash tray light.
I just re-read your first post... you mentioned lighting it with the ash tray light.
Last edited by 860 Performance; Aug 9, 2005 at 08:42 AM.
Matt, glad to see your making use of your buddies CNC machine. Looks really good and will look awesome with a backlight. I would expect to have some people harrasing you for some of those. 
Thread Starter
TECH Junkie
iTrader: (19)
Joined: Feb 2005
Posts: 3,155
Likes: 0
From: Sandusky, Ohio
Originally Posted by GM Muscle
Matt, glad to see your making use of your buddies CNC machine. Looks really good and will look awesome with a backlight. I would expect to have some people harrasing you for some of those.
The guy whose CNC I used at first said that he wouldn't be interested in small jobs like that. But when I told him what the other switch panels go for, he changed his mind!
Once I get it done and if I have enough people interested, I'll see if he can run off a couple more. Only took a couple minutes, and thats because we were running the machine slow so it wouldn't melt the plastic