Custom Billet micro switches...
#1
Custom Billet micro switches...
Ok somepeople already know we offer custom billet micro switch brackets.These units come with detailed instructions,wiring ends, billet brackets and preformed microswitches.
The LS1s have been available for a while now.We have recently ffinished the LT1 and the GTO is comming soon.
Click this link to see the dteailed pics and instructions on the LS1 and LT1 custom brackets.
http://www.nitrousoutlet.com/outlet/...le_bracket.pdf
http://www.nitrousoutlet.com/outlet/...et_Bracket.pdf
Thanks
Dave
The LS1s have been available for a while now.We have recently ffinished the LT1 and the GTO is comming soon.
Click this link to see the dteailed pics and instructions on the LS1 and LT1 custom brackets.
http://www.nitrousoutlet.com/outlet/...le_bracket.pdf
http://www.nitrousoutlet.com/outlet/...et_Bracket.pdf
Thanks
Dave
#2
Dave, feedback for you.....been running mine for months now and....
THESE BRACKETS RULE! Install was so much easier, and finished product is clean looking. I love it. Thanks.
THESE BRACKETS RULE! Install was so much easier, and finished product is clean looking. I love it. Thanks.
#6
Well, if some of the guys on island werent so stingy with not wanting to pay shipping, which adds about 50% to the cost of moding a car here, then I would have already talked a few more ppl into getting them. I might order a batch from you, say about 10 or 20, and work some deal out....thinking..
Trending Topics
#8
Originally Posted by CAT3
Well, if some of the guys on island werent so stingy with not wanting to pay shipping, which adds about 50% to the cost of moding a car here, then I would have already talked a few more ppl into getting them. I might order a batch from you, say about 10 or 20, and work some deal out....thinking..
Send me a pm let me know what you want to do and Ill put something together for you.
Dave
#10
Originally Posted by 01 Red WS6
I want one but I dont even have my kit ordered yet
Dave
#16
LOL,
Yes the microswitch comes with it.
The arm on the microswitch is formed for a perfect fit. There are no nuts, the part is tapped and thread, and includes flag terminals for that ultra tight fit.The units starts off as a block of alluminum.Then it goes through the CNC process and this clean looking perfect fitting unit is what we have at the end.
Thanks
Dave
Yes the microswitch comes with it.
The arm on the microswitch is formed for a perfect fit. There are no nuts, the part is tapped and thread, and includes flag terminals for that ultra tight fit.The units starts off as a block of alluminum.Then it goes through the CNC process and this clean looking perfect fitting unit is what we have at the end.
Thanks
Dave
#18
Edger,
No this will not. However we are looking at making one that will. Send your throttle body when you send in your intake and we will get started even sooner.LOL
Dave
No this will not. However we are looking at making one that will. Send your throttle body when you send in your intake and we will get started even sooner.LOL
Dave