Another New Product! The Angle!!!
Thread Starter
FormerVendor
iTrader: (14)
Joined: Jun 2005
Posts: 2,056
Likes: 0
From: Glenolden, PA
Another New Product! The Angle!!! 
These guys are pretty cool. They are in packaging now and should be ready to ship in a week or so. Pricing is $110.00. Let me know if you guys have any other questions.
Matt
Thread Starter
FormerVendor
iTrader: (14)
Joined: Jun 2005
Posts: 2,056
Likes: 0
From: Glenolden, PA
The Angle is more of a basic progressive controller. It doesn’t have any of the delay features or monitoring features. It was more or less designed for someone who already had a window switch but wanted a TPS switch and a basic progressive controller. For a few bucks more then the other brands TPS switch you get a progressive controller and a rapid-fire purge controller. For someone who wants the "High End" controller The Edge fills that gap. Have a few more announcements coming next week....
Matt
Matt
Originally Posted by civicflnum1
Whats the difference between this and the other progessive n20 controller you listed? Both seem like bad *** products
Originally Posted by Matt@HSW
The Angle is more of a basic progressive controller. It doesn’t have any of the delay features or monitoring features. It was more or less designed for someone who already had a window switch but wanted a TPS switch and a basic progressive controller. For a few bucks more then the other brands TPS switch you get a progressive controller and a rapid-fire purge controller. For someone who wants the "High End" controller The Edge fills that gap. Have a few more announcements coming next week....
Matt
Matt
Any plans on doing a plate or MAF styled kit? I am working on a design I might have to pass by one you guys for more detail on how to complete...Good work, keep the new stuff coming.
Trending Topics
Thread Starter
FormerVendor
iTrader: (14)
Joined: Jun 2005
Posts: 2,056
Likes: 0
From: Glenolden, PA
LOL, it’s quite possible that we might have some new nitrous kits coming out.....
Matt
Matt
Originally Posted by CAT3
Any plans on doing a plate or MAF styled kit? I am working on a design I might have to pass by one you guys for more detail on how to complete...Good work, keep the new stuff coming.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
There is no adjustment, it pulses at 50% until you either; push a button to turn it off, manual trans car could use a WOT (micro) switch to only use the progressive controller in 1st gear or use a digi timer for time based progression.
Originally Posted by red90cobra
There is no adjustment, it pulses at 50% until you either; push a button to turn it off, manual trans car could use a WOT (micro) switch to only use the progressive controller in 1st gear or use a digi timer for time based progression.
Thread Starter
FormerVendor
iTrader: (14)
Joined: Jun 2005
Posts: 2,056
Likes: 0
From: Glenolden, PA
red90cobra is correct. It's a real simple controller. 4 opinions off the top of my head. Push a button to turn it off, manual trans car could use a WOT (micro) switch to only use the progressive controller in 1st gear or use a digi timer for time based progression and lastly use a window switch so the progression is active during a set RPM band. The unit can control up to 2 large solenoids. We are going to package it with a low cost window switch and digi timer.
Matt
Matt