NX bottle opener refill WITHOUT REMOVING MOTOR.
#1
Closed ex-Sponsor Account
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Wichita Falls, TX
Posts: 2,797
Likes: 0
Received 0 Likes
on
0 Posts
NX bottle opener refill WITHOUT REMOVING MOTOR.
Ok you will need 2 maybe 3 9volt batterys, there harness' opener style switch, DPDT, weather pack, a small amount of wire, and a clean case or DUCK TAPE>
You wire the batteries in series with each other, then the RED and Black Left over will go to your DPDT switch, then to the weather pack. Final put into a small case or get the DUCK TAPE out and put it all together...
What you just built is a small remote bottle opener power source.
I built one of these in the past a long, long, long time ago. Work like a champ...
Just make sure you get the same weather pack side that is on the car side of the harness......
I take some pics this weekend and show you..
Ricky
You wire the batteries in series with each other, then the RED and Black Left over will go to your DPDT switch, then to the weather pack. Final put into a small case or get the DUCK TAPE out and put it all together...
What you just built is a small remote bottle opener power source.
I built one of these in the past a long, long, long time ago. Work like a champ...
Just make sure you get the same weather pack side that is on the car side of the harness......
I take some pics this weekend and show you..
Ricky
#7
TECH Enthusiast
Join Date: Jul 2002
Location: Dallas, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
I knwo you explained how to make it in your post, but it doesn't mean as much if you don't know what your talkign about.
What is a weather connector, how do you wire in series? What wires do you use, where do you get all this stuff.
Man I wish we had a picture.
What is a weather connector, how do you wire in series? What wires do you use, where do you get all this stuff.
Man I wish we had a picture.
Trending Topics
#8
TECH Addict
iTrader: (36)
Join Date: Apr 2002
Location: Murphy, Tx
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2001 Red Coupe Bandit
I knwo you explained how to make it in your post, but it doesn't mean as much if you don't know what your talkign about.
What is a weather connector, how do you wire in series? What wires do you use, where do you get all this stuff.
Man I wish we had a picture.
What is a weather connector, how do you wire in series? What wires do you use, where do you get all this stuff.
Man I wish we had a picture.
#9
Closed ex-Sponsor Account
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Wichita Falls, TX
Posts: 2,797
Likes: 0
Received 0 Likes
on
0 Posts
In your kit with the bottle opener came some quick disconnects.. You just have to find the same side as your harness has for the remote controller... Then it just plugs into your opener harness.
Ricky
Ricky
#10
10 Second Club
iTrader: (2)
Join Date: Dec 2004
Location: Sumter, South Carolina
Posts: 1,386
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by NXRICKY
Ok you will need 2 maybe 3 9volt batterys, there harness' opener style switch, DPDT, weather pack, a small amount of wire, and a clean case or DUCK TAPE>
You wire the batteries in series with each other, then the RED and Black Left over will go to your DPDT switch, then to the weather pack. Final put into a small case or get the DUCK TAPE out and put it all together...
What you just built is a small remote bottle opener power source.
I built one of these in the past a long, long, long time ago. Work like a champ...
Just make sure you get the same weather pack side that is on the car side of the harness......
I take some pics this weekend and show you..
Ricky
You wire the batteries in series with each other, then the RED and Black Left over will go to your DPDT switch, then to the weather pack. Final put into a small case or get the DUCK TAPE out and put it all together...
What you just built is a small remote bottle opener power source.
I built one of these in the past a long, long, long time ago. Work like a champ...
Just make sure you get the same weather pack side that is on the car side of the harness......
I take some pics this weekend and show you..
Ricky
#12
Banned
iTrader: (115)
Originally Posted by NXRICKY
Ok you will need 2 maybe 3 9volt batterys, there harness' opener style switch, DPDT, weather pack, a small amount of wire, and a clean case or DUCK TAPE>
You wire the batteries in series with each other, then the RED and Black Left over will go to your DPDT switch, then to the weather pack. Final put into a small case or get the DUCK TAPE out and put it all together...
What you just built is a small remote bottle opener power source.
I built one of these in the past a long, long, long time ago. Work like a champ...
Just make sure you get the same weather pack side that is on the car side of the harness......
I take some pics this weekend and show you..
Ricky
You wire the batteries in series with each other, then the RED and Black Left over will go to your DPDT switch, then to the weather pack. Final put into a small case or get the DUCK TAPE out and put it all together...
What you just built is a small remote bottle opener power source.
I built one of these in the past a long, long, long time ago. Work like a champ...
Just make sure you get the same weather pack side that is on the car side of the harness......
I take some pics this weekend and show you..
Ricky
#13
10 Second Club
iTrader: (4)
Join Date: Aug 2004
Location: Southern Maryland
Posts: 3,576
Likes: 0
Received 0 Likes
on
0 Posts
Ricky, you should post up some IN DEPTH instructions for the LS1tech users here. Just to ensure you help those of us who are completely retarded. That would be awesome if you did something like that. I mean this is a great idea you created here! Not to mention that you might be losing a high dollar idea to some of the vendors on this site without a patent. JMO
#14
Closed ex-Sponsor Account
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Wichita Falls, TX
Posts: 2,797
Likes: 0
Received 0 Likes
on
0 Posts
Ok sorry it took so long to find. Here it is. I use 3 9volts batteries in series for a total of 27 volts. Do not remember why the batteries might be a little weak. I would recommend starting with 2 @18 volts.
The plastic box radio shack think was 4 or 5 dollars. then a switch and 9 volt jumpers.
Ricky
The plastic box radio shack think was 4 or 5 dollars. then a switch and 9 volt jumpers.
Ricky
#17
Banned
iTrader: (115)
Originally Posted by NXRICKY
Oh yea the finder fee for every one built is 1.00. lol
And I am watching.. haha
Ricky
And I am watching.. haha
Ricky
#18
10 Second Club
iTrader: (4)
Join Date: Aug 2004
Location: Southern Maryland
Posts: 3,576
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 99blancoSS
I see another product opportunity for NX that Dave can sell I'd buy a $10 or $15 switch from Dave. You already know how much it cost to make. Wouldnt bother me in the slightest to pay double or more for somethiing under $20 in this case.
#20
TECH Enthusiast
Join Date: Jul 2002
Location: Dallas, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
If I know Dave, he just drove there and bought all their 9 volts, boxes,and wiring. And if he didn't then I am on my way. I charge $25 shipped...... Just kidding
REALLY, THANKS RICKY!!!!!!!!!!!!!!!!!!!!!
Someone needs to find where the Weather Connectors can be bought that will fit the NX Remote Bottle Opener.
Looks liek the rest is at Radio Shack
REALLY, THANKS RICKY!!!!!!!!!!!!!!!!!!!!!
Someone needs to find where the Weather Connectors can be bought that will fit the NX Remote Bottle Opener.
Looks liek the rest is at Radio Shack