DynoTune bottle opener ?
DynoTune bottle opener ? have an older NOS brand 10 lb bottle that says "NOS High Flow" on the ****, the **** is also blue, will your bottle opener work for me ? also what kind of switching is used to operate the opener ? momentary ? SPDT ? DPDT ? thanx
Check their website dynotunenitrous.com, I was just on their looking around and I believe it said that their remote bottle openers would not work with the NOS high flow, maybe Dan can shed some more light on this.
i looked at that, but it said "super high flow" with a black ****, mine is blue and it just says "high flow", they're instruction page would have been helpful but the page dont work.........
If the **** comes out of the valve at a 45 degree angle it will work. The opener comes with a 3 position momentary reversing switch. Email us and we will send you the directions if you like.
Thanks for the interest!
Dean
Thanks for the interest!
Dean
Originally Posted by oange ss
it doesnt come out at a 45, it comes straight up....damn it i already bought one!!!!!! would it help if i sent you a pic of it ??
Dean
Trending Topics
Originally Posted by oange ss
sorry i came to the conclusion it wouldnt work which sux because it was a nice unit
http://www.dynotunenitrous.com/store...p?idproduct=80
We will be adding additional support for different valves as we can! We are working for you!
Dean
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Eastern 
Staging Lane
Joined: Oct 2005
Posts: 91
Likes: 0
From: GMT-10 Hours
Sorry orange ss but I gotta 'jack this thread In reference to these past posts:
https://ls1tech.com/forums/showpost....7&postcount=35
https://ls1tech.com/forums/showpost....1&postcount=41
Did you guys have a chance to work on them yet?
https://ls1tech.com/forums/showpost....7&postcount=35
https://ls1tech.com/forums/showpost....1&postcount=41
Did you guys have a chance to work on them yet?
Yes we did work on it. Built a few proto units. Honestly, we just have not had the time to mark up the drawings and get them to the machine shop. We have been buried!
We have a few new folks coming on board so it should free up everyones time to start pumping out the products again....Sorry about the delay. We will need time to finish this as we still have a few other things in front of it.
Dan
We have a few new folks coming on board so it should free up everyones time to start pumping out the products again....Sorry about the delay. We will need time to finish this as we still have a few other things in front of it.
Dan
Staging Lane
Joined: Oct 2005
Posts: 91
Likes: 0
From: GMT-10 Hours
Originally Posted by DynotuneN2O
Yes we did work on it. Built a few proto units. Honestly, we just have not had the time to mark up the drawings and get them to the machine shop. We have been buried!
We have a few new folks coming on board so it should free up everyones time to start pumping out the products again....Sorry about the delay. We will need time to finish this as we still have a few other things in front of it.
Dan
We have a few new folks coming on board so it should free up everyones time to start pumping out the products again....Sorry about the delay. We will need time to finish this as we still have a few other things in front of it.
Dan
https://ls1tech.com/forums/showp...37&postcount=35
https://ls1tech.com/forums/showp...01&postcount=41
Any new updates on this?