dsmawd350

iTrader: (2)

Hey guys I have a mech N20 pressure guage and i need to tap into my main nitrous line and run a SS line up to my guage whats the best way to do this?

A fitting that i could put between the main feed line and the solenoid that T's off for me to run another line to the guage?

what sizw fittings and ss line do i need to do this like what -an? its a Gm efi NX kit

oange ss

iTrader: (50)

get a manifold and 1/8 to #4 AN fitting or run the fitting out of the bottle valve accy port if it has one, then run the #4 line up to the guage

dsmawd350

iTrader: (2)

is the fitting on the back of the guage 1/8"? is that what i need the adapther for?

oange ss

iTrader: (50)

no the fitting goes in the manifold, the guage should have an adapter with it or built in

dsmawd350

iTrader: (2)

do you know what size the fittings are on are the main line on NX kits? 6an or 4 an something like this should work http://www.harrisspeedworks.com/shop...cat=348&page=1

oange ss

iTrader: (50)

should be 4AN, Ricky or Jeremy could tell you for sure