nozzle shootout
www.vincihighperformance.com let me borrow their yank tranny tricker. this lets me put the trans into any gear i want and it won't downshift. seeing as we want a 3000-6000 rpms range, it will be needed as my car will downshift at 3000rpms. won't downshift at 3200 rpms. this way, i can start the run at 2500 rpms and we'll see the n2o come on.
Closed ex-Sponsor Account
iTrader: (1)
Joined: Jul 2004
Posts: 2,797
Likes: 0
From: Wichita Falls, TX
So you will set the window switch at 3000-6000? Put the car in drive get to 2500 deck it, NO nitrous and then 3000 lets the puppies out. Right?
this is going to get interesting,.
Ricky
this is going to get interesting,.
Ricky
Closed ex-Sponsor Account
iTrader: (1)
Joined: Jul 2004
Posts: 2,797
Likes: 0
From: Wichita Falls, TX
Originally Posted by NXRICKY
Just like before I am game
. , I am betting it wil go well past 5 pages......
Ricky
. , I am betting it wil go well past 5 pages......Ricky
This one is for Jeremy at work. So please do not bust me up on this.,Scarey how often I am right. Ricky
FormerVendor
Joined: Apr 2005
Posts: 864
Likes: 0
From: Wichita Falls,Tx
That's pretty funny, but like most things it's all about perspective and who's perspective is being used. I say this because from my view this thread is only 4 pages, not 5
Originally Posted by NXRICKY
This one is for Jeremy at work. So please do not bust me up on this.,Scarey how often I am right. Ricky
Originally Posted by NXRICKY
So you will set the window switch at 3000-6000? Put the car in drive get to 2500 deck it, NO nitrous and then 3000 lets the puppies out. Right?
this is going to get interesting,.
Ricky
this is going to get interesting,.
Ricky
the dynotune nozzle i received does not accept NX jets. i can swap out the brass ends for ones out of a NX nozzle so i can still test it. just not sure if it would really skew the results of it.
Originally Posted by mrr23
the dynotune nozzle i received does not accept NX jets. i can swap out the brass ends for ones out of a NX nozzle so i can still test it. just not sure if it would really skew the results of it.
Dean
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo the two stage controller works. tested it today. 
activated right at 3000 rpms according to my in dash tach. which it gets it's feed from the #10 wire off the PCM harness. now, just waiting for a specific day this week to get on the dyno.
activated right at 3000 rpms according to my in dash tach. which it gets it's feed from the #10 wire off the PCM harness. now, just waiting for a specific day this week to get on the dyno. 
Originally Posted by mrr23
i'll be at the nmca races at bradenton this weekend working with bassani and their display area. any of you vendors and people going to be there?
Jessie
