!!! Super Cool !!! Photos: Nitrous Outlet Stand Alone!!!
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Originally Posted by 1936FordPU
Do you think you could clean up that wiring some? 
Even with the look trying to hide it it could all be bundled up a little better in fewer looms. Looks kinda ricey, IMO
Even with the look trying to hide it it could all be bundled up a little better in fewer looms. Looks kinda ricey, IMO
Those photos are the middle of the install. I missed the ricey comment.
Thanks for the input! I like individually wrapped loom in the short run...easier to trouble shoot any issues that may arise. Hey it's built in Texas and it's fast. Macon
Last edited by Macon; Mar 7, 2006 at 01:51 PM.
Now It's finally my turn. 
Originally Posted by Macon
EDIT: FINISHED PHOTOS at about post 9
I am FINALLY getting started on my Stand Alone system from NX and Nitrous Outlet
I am FINALLY getting started on my Stand Alone system from NX and Nitrous Outlet
Here are some photos taken IN THE MIDDLE OF THE INSTALLTION:
Basic NX MAF system is the back bone.
Noids mounted on a Bracket available from
NITROUS OUTLET!
The STAND ALONE FUEL CELL from
NITROUS OUTLET.
The Fuel Cell sitting in mock-up for the night. In fact everything is in mock up.
A second view of the Fuel Cell mocked up.
I will ftp more photos after more work is complete. No the wires do not stay draped over the intake!!
Note: Thanks to Nitro Dave, NX and others for supplying all of us with such high quality, reliable parts. Folks this stuff is paid for just like any of you would...i'm a small (well at 6'2" 285 not small) fish in a big bowl of Nitrous. The time that Jeremy and Ricky have spent with me via IM and phone has been extremely helpful. I have bounced ideas off of them for months to the point where my welsome must have been worn out...but these guys treat everyone like gold. Nitro Dave is an easy guy to like...he has so much business, and still takes the time to bust hump down to UPS just so I can have a bracket. When you choose a vendor, treat them well and they treat you well. Wonder why I note so many companies in my sig. They derserve it.
Awesome job on your car Macon.
I like the looks of the fuel cell.I noticed in one of your pictures of where your noids are mounted. That bracket I made one of these back in 2003 when I first installed my system. I never knew anyone other than myself with one of these. I knew someone would see the idea and start to make then sell these. I made one out of cardboard for a templete then gave it to my friend Mike "Airwolf" that made it out of stainless for me. Here is my setup back in 2003 before I went to the maf kit. Hopefully it sells good for Nitrous Outlet.
Originally Posted by 02 Pewter LS1
Awesome job on your car Macon. I like the looks of the fuel cell.
I noticed in one of your pictures of where your noids are mounted. That bracket I made one of these back in 2003 when I first installed my system. I never knew anyone other than myself with one of these. I knew someone would see the idea and start to make then sell these. I made one out of cardboard for a templete then gave it to my friend Mike "Airwolf" that made it out of stainless for me. Here is my setup back in 2003 before I went to the maf kit. Hopefully it sells good for Nitrous Outlet.
I like the looks of the fuel cell.I noticed in one of your pictures of where your noids are mounted. That bracket I made one of these back in 2003 when I first installed my system. I never knew anyone other than myself with one of these. I knew someone would see the idea and start to make then sell these. I made one out of cardboard for a templete then gave it to my friend Mike "Airwolf" that made it out of stainless for me. Here is my setup back in 2003 before I went to the maf kit. Hopefully it sells good for Nitrous Outlet.
I also have been making them out of SS and polishing them. I remember when some of the vendors were stating oh you can't run noids on the head cause of heat. I was doing it anyway, thinking that was nonsense. You have a nice set-up by the way. Macon your car is trick for sure.(not a very good pic, but...)
Robert
Robert nice setup I like that as well. I was told the same thing about the heat of mounting them on the head. I said I would take a chance with no problems for over 3 years. I have changed to the NX maf kit and just added a few more parts since then.
Yep Airwolf it seems so long ago and to have that nice Vette for 4 years and only have 8,000 miles on it is nice. It still had that new car smell yesterday when I got to drive it.
Yep Airwolf it seems so long ago and to have that nice Vette for 4 years and only have 8,000 miles on it is nice. It still had that new car smell yesterday when I got to drive it.
