kit is going in a 6 speed 00 vette,i'm using a digital window switch from msd with a dynotune wet kit along with the arming switch and a hand activated switch wich use to be a trans brake switch,i know i should of gone with the tps/window switch but is too late now.

 

Dynotune didn't have instructions included? I think their site may outline a setup and varying setups for instances such as these. If not, check with Robert56 or NXRicky on this forum section - Nitrous. So many nitrous vendors I forget who deals in what.

 

If you have not recieved your kit yet, or you did not get your instructions, PM Dean or Dan at Dynotune, they will email you what you need.

For the linelock I think Hurst has those instructions availible online.

 

the instructions in the kit are not for wiring in of the window switch and the ones with the window switch are to use the window switch by itself without a switch i think,i messed up is not a line lock switch is a trans brake switch that i use to activate the nitrous after arming it.

 

Whoops posted this in the other thread, shoulda been here sorry...

OK when it comes to wiring...Do a search for NXRicky and whatever it is your trying to wire...in this case MSD...

https://ls1tech.com/forums/showthrea...&highlight=MSD

Hope that helps?

 

got it all working,thanks to those that tried to help.