1 gallon fuel cell
04-08-2006, 11:17 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: Houston, Tx
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
1 gallon fuel cell I've found the following 1 gallon cell searching Summit, but I don't know if a 1 gal will be enough fuel for a 200 shot. And if it is large enough, how many passes would it be good for before I needed to refill it - I'm assuming I'd need to refill it after every pass. Any thoughts???
BTW, I already have a capable pump and regulator - just need a cell.
http://store.summitracing.com/partde...5&autoview=sku
BTW, I already have a capable pump and regulator - just need a cell.
http://store.summitracing.com/partde...5&autoview=sku
Last edited by pigpen; 04-08-2006 at 11:30 PM.
04-08-2006, 11:20 PM
#2
TECH Fanatic
iTrader: (2)
Join Date: Jul 2004
Location: Greensburg,PA
Posts: 1,882
Likes: 0
Received 0 Likes
on
0 Posts
hmm looks sweet, if any help, nitrodaves stand alone in only 3 qt. I personally like it, might be a good option. There is a formula to figure it out, I have it book marked, I find it.
04-09-2006, 12:14 AM
#5
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: Houston, Tx
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys - that sounds good. The only other thing I'm worried about, is whether the tank I have listed is actually 1 gallon - Summit lists it as 1 gal, but it's only 6x6x6. All the plastic 1 gall cells show to be 6x6x12.
Trending Topics
04-09-2006, 04:54 AM
#12
a few cuts, and i've switched to a painless 12 circuit wiring harness with fuse panel located inside the car. note to self.... don't cut wires at 2 am. the engine was pulled so i could clean and paint the firewall, but is back in now
I had already cut alot away, so only had to cut a small clip out and it fit right in
I had already cut alot away, so only had to cut a small clip out and it fit right in
04-09-2006, 05:14 AM
#18
looks good! you really don't need a box for an optima though. they are a dry cell and you only need a box for a wet cell. I need to find it and print it up so when techs get a big head i can knock em down a few. Wheres the blowdown tube?
Later on i'll switch to brushed aluminum angle using his style, but have hinges on it so the bottle doesn't have to be pulled to get to the battery (for tech)
One of the DP since i'm sure the original poster is planning on doing a DP kit
Later on i'll switch to brushed aluminum angle using his style, but have hinges on it so the bottle doesn't have to be pulled to get to the battery (for tech)
One of the DP since i'm sure the original poster is planning on doing a DP kit
Last edited by chpmnsws6; 04-09-2006 at 05:24 AM.
04-09-2006, 05:33 AM
#19
Yeah... we kinda re-railed this thread. Oops. Good **** though. Yeah, a buddy was getting rid of the battery box and I got it from him for 10 bucks. It originally had the factory battery in it, but I threw in the optima later on. Too lazy to change it but I might take it out for drag racing... loose a pound or 2... Heres another picture of my jaz cell also so maybe we can get the thread back on track...