Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Sprayed for the first time using fuel from the stand alone. WOW!

Thread Tools
 
Search this Thread
 
Old Apr 9, 2006 | 11:58 AM
  #1  
SmaknaSS's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Sep 2002
Posts: 1,684
Likes: 0
Default Sprayed for the first time using fuel from the stand alone. WOW!

I dont know if it's just me or not but spraying nitrous and using fuel from my stand alone seem's to hit much harder than before. My AFR way richer this time to about11.3~11.6 AFR from 12.7~11.9 AFR from before. I guess I need to get back on the dyno to find out where my power is really at. BTW my FJO is set the same as before: I'm spraying from 20% to 100% in a 1 sec ramp time.
Reply
Old Apr 9, 2006 | 12:39 PM
  #2  
CAT3's Avatar
Restricted User
iTrader: (9)
 
Joined: Sep 2002
Posts: 7,603
Likes: 0
From: Sierra Vista, AZ
Default

What size shot and type kit ( I see NX, but single nozzle or what)?
Reply
Old Apr 9, 2006 | 12:46 PM
  #3  
SmaknaSS's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Sep 2002
Posts: 1,684
Likes: 0
Default

Originally Posted by CAT3
What size shot and type kit ( I see NX, but single nozzle or what)?
Dual shark nozzle NX kit and only 100HP Shot to keep it safe for now.
Reply
Old Apr 9, 2006 | 12:48 PM
  #4  
CAT3's Avatar
Restricted User
iTrader: (9)
 
Joined: Sep 2002
Posts: 7,603
Likes: 0
From: Sierra Vista, AZ
Default

Running 50shot each side? Low pressure fueling? Richen it up before you go much bigger.
Reply
Old Apr 9, 2006 | 12:51 PM
  #5  
SmaknaSS's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Sep 2002
Posts: 1,684
Likes: 0
Default

Originally Posted by CAT3
Running 50shot each side? Low pressure fueling? Richen it up before you go much bigger.
yes, a 50HP shot each side and high pressure fueling (60 PSI) for now.
Reply
Old Apr 10, 2006 | 09:49 PM
  #6  
BadAssFast's Avatar
10 Second Club
iTrader: (2)
 
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Default

Originally Posted by SmaknaSS
I dont know if it's just me or not but spraying nitrous and using fuel from my stand alone seem's to hit much harder than before. My AFR way richer this time to about11.3~11.6 AFR from 12.7~11.9 AFR from before. I guess I need to get back on the dyno to find out where my power is really at. BTW my FJO is set the same as before: I'm spraying from 20% to 100% in a 1 sec ramp time.
What kind of fuel pressure are you running high or low?
Reply
Old Apr 10, 2006 | 10:03 PM
  #7  
brad8266's Avatar
TECH Senior Member
iTrader: (23)
 
Joined: Aug 2005
Posts: 8,797
Likes: 0
From: Watertown, NY
Default

high see above post. 60 psi
Reply




All times are GMT -5. The time now is 05:33 AM.