help!!!!
Make sure you are using a good 6-point socket or wrench to keep from rounding off the corners on the fitting. Heat will help but call the manufacurer first as too much might damage the solenoid.
Next time use medium strength locktite (blue), and it only takes a little. It sounds like you used a bunch of (red) stud & bearing mount locktite. That type says on the bottle you need to use heat to remove it. But if you don't use too much it will sometimes come loose without heat.
Next time use medium strength locktite (blue), and it only takes a little. It sounds like you used a bunch of (red) stud & bearing mount locktite. That type says on the bottle you need to use heat to remove it. But if you don't use too much it will sometimes come loose without heat.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
