Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

ATTN: all TNT nitrous users; questions.

Old Apr 10, 2006 | 12:28 PM
  #1  
Built LT1's Avatar
Thread Starter
11 Second Club
iTrader: (3)
 
Joined: Jan 2006
Posts: 518
Likes: 0
From: SoCal
Default ATTN: all TNT nitrous users; questions.

I was wondering what members have or know someone who has dynoed with TNT. My question specifically is what did they picked up at the rear wheel with a given shot? Also, note track improvements if possible.

Please specify A4 or M6.

I currently have TNT and used NX previously. Both kits are great in my experience but the TNT plate system clearly seems stronger to me. While I have dynoed a 175 shot of NX and picked up 140 to wheels, I unfortunately have never dynoed my TNT kit. I have however picked up 17 miles per hour on a 150 shot of TNT (108 to 124 trap) with an A4.

You responses are appreciated. I am considering going to a larger shot on my next LT1 stroker.
Reply
Old Apr 10, 2006 | 12:39 PM
  #2  
steveb's Avatar
Launching!
 
Joined: Oct 2005
Posts: 216
Likes: 0
From: Fallriver, MA
Default

I was told by TSP that the 100 shot is more like a 125-135. So i would say your 150 shoot is probally getting you closer to a 200. Good luck and happy spraying.
STEVE
Reply
Old Apr 10, 2006 | 05:08 PM
  #3  
TNTramair's Avatar
11 Second Club
iTrader: (15)
 
Joined: Feb 2004
Posts: 2,743
Likes: 1
From: ne philly
Default

190rwhp and 210rwtq gain on a 150 shot....+14mph in the quarter and dropped a full second.
Reply
Old Apr 10, 2006 | 05:52 PM
  #4  
TRMIN8R's Avatar
9 Second Club
20 Year Member
iTrader: (42)
 
Joined: Oct 2004
Posts: 661
Likes: 0
From: TEXAS
Default

A 100 shot is a 100 shot, no matter what company makes the kit. The jet size is the key, you can make the same power with pretty much any kit, just get the correct jets.

With that said, I have a TNT F2 on my car, on the 100 shot, I made 563rwhp. Then on the 150 shot, I made 602rwhp. Then finally on the 200 shot, I made 638rwhp. Keep in mind that I only make 414rwhp on motor.
Reply
Old Apr 11, 2006 | 11:12 AM
  #5  
David@TNT's Avatar
TECH Apprentice
 
Joined: Jul 2004
Posts: 304
Likes: 0
From: Texas
Default

Originally Posted by Built LT1
I was wondering what members have or know someone who has dynoed with TNT. My question specifically is what did they picked up at the rear wheel with a given shot? Also, note track improvements if possible.

Please specify A4 or M6.

I currently have TNT and used NX previously. Both kits are great in my experience but the TNT plate system clearly seems stronger to me. While I have dynoed a 175 shot of NX and picked up 140 to wheels, I unfortunately have never dynoed my TNT kit. I have however picked up 17 miles per hour on a 150 shot of TNT (108 to 124 trap) with an A4.

You responses are appreciated. I am considering going to a larger shot on my next LT1 stroker.
The way the jetting was set was on a bone stock LS1.. And if you put our kit on a "stock" car they typically make 106-112rwhp @ 900psi, now when you add aftermarket parts the numbers of course are going to vary especially if the bottle pressure is up at the typical 1050psi.. My .02 David@TNT
Reply
Old Apr 12, 2006 | 12:23 PM
  #6  
Bad Bob's Avatar
Teching In
 
Joined: Jun 2005
Posts: 3
Likes: 0
Default

I have the TNT kit and had it dynoed on a H/C car with TPIS headers, K&N car without juice did 421rwhp / 387 rwtq without the nitrous and with the 100 shot 540rwhp / 566rwtq.
I now have a new stroker motor with a fully forged bottom end but haven't dynoed with the bottle but it's coming.
Bob
Reply
Old Apr 12, 2006 | 09:42 PM
  #7  
Threesixes's Avatar
11 Second Club
iTrader: (5)
 
Joined: Mar 2003
Posts: 198
Likes: 0
From: CA
Default

I picked up 120 rwhp with a TNT 100 shot.
Reply
Old Apr 12, 2006 | 10:46 PM
  #8  
Unstang's Avatar
TECH Fanatic
iTrader: (26)
 
Joined: Oct 2003
Posts: 1,564
Likes: 0
From: Waukee, Iowa
Default

Same day on the 150 pills, I picked up 13 mph and dropped 1.2 seconds off of the ET. I had a cam only '98 Z.
Reply
Old Apr 13, 2006 | 06:29 PM
  #9  
SPRAYED 01's Avatar
10 Second Club
iTrader: (22)
 
Joined: Mar 2006
Posts: 3,677
Likes: 2
From: Northwest side of Chicago
Default

I went from cam only at 397hp to 548hp with the tnt 150 shot. almost perfect. went from 13.0 to 11.5 when i had a stock motor. great kit.
Reply
Old Apr 14, 2006 | 01:35 PM
  #10  
CraZee ZO6's Avatar
TECH Resident
 
Joined: Dec 2003
Posts: 797
Likes: 0
From: Long Island, NY
Default

I picked up 125rwhp on a 100 shot on my stock zo6.
But I spray at 1000-1050psi.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:48 AM.