Window switch, tps, progressive programmer...IN ONE BOX!
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Window switch, tps, progressive programmer...IN ONE BOX! Someone needs to make one. My idea is to simply hook power and noids directly to this jewel. Or does it already exist? 
Macon. Right here.
http://www.nitrousoutlet.com/catalog...product_id=952
or
http://www.nitrousoutlet.com/catalog...roduct_id=1539
Dave
http://www.nitrousoutlet.com/catalog...product_id=952
or
http://www.nitrousoutlet.com/catalog...roduct_id=1539
Dave
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Originally Posted by Nitro Dave's Nitrous Outlet
Macon. Right here.
http://www.nitrousoutlet.com/catalog...product_id=952
or
http://www.nitrousoutlet.com/catalog...roduct_id=1539
Dave
http://www.nitrousoutlet.com/catalog...product_id=952
or
http://www.nitrousoutlet.com/catalog...roduct_id=1539
Dave
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Originally Posted by Matt@HSW
Yeah, quite a few on the market, I thought I sent you the instructions on our Edge controller months ago?
Matt
Matt
So Matt - Yep still have the paper work on it...thank you. At the time I was looking into simply logging perfromance. Now I am really thinking more in terms of simplifing installation. So with The Edge and The FJO piece seems like these pieces solve lots of potential issues. Same answser to different questions in a way.
Thanks - Macon
that looks pretty cool, but i'm kinda confused in some areas. what does TPS stand for? and with this little box, i can basically controll when and how much the nitrous is shooting from my laptop, but will i have to have my laptop with me any time i want to shoot? or can i preprogram settings and leave it alone?
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Originally Posted by Sunset'01Z
that looks pretty cool, but i'm kinda confused in some areas. what does TPS stand for? and with this little box, i can basically controll when and how much the nitrous is shooting from my laptop, but will i have to have my laptop with me any time i want to shoot? or can i preprogram settings and leave it alone?
Edge does not require a laptop.
FJO does require a laptop.
I think i am correct here.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Originally Posted by Sunset'01Z
does the FJO require me to have my laptop in the car whenever i'm spraying?
hey dave, on the FJO Kit can you use the trans brake wire on a clutch switch? reason i ask is for the M6 guys that are using a 2 step to lauch and have ther RPM in the "window" and have the pedal to the floor.
Closed ex-Sponsor Account
iTrader: (1)
Joined: Jul 2004
Posts: 2,797
Likes: 0
From: Wichita Falls, TX
Originally Posted by algws6
hey dave, on the FJO Kit can you use the trans brake wire on a clutch switch? reason i ask is for the M6 guys that are using a 2 step to lauch and have ther RPM in the "window" and have the pedal to the floor.
Ricky
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Originally Posted by NXRICKY
yes you can use the trigger wire to disable the system. So in a clutch set up just set up a switch to close its contacts when pressed in. This will turn the system off.
Ricky
Ricky
Originally Posted by NXRICKY
yes you can use the trigger wire to disable the system. So in a clutch set up just set up a switch to close its contacts when pressed in. This will turn the system off.
Ricky
Ricky
I would like sometime to get it all drawn up and see if any one else has a more complicated wiring system. Which I would like to make more simple. Robert
I feel you on the wiring Robert. I am looking at a options to redo my entire Nitrous and controlling setup. Final will be two stages, two step, trans brake, line lock, heater, purge....WTFE else I can think of wiring into this bad boy. I like how Beer posted his switches being jumpered off each other, for ground. Now I am looking into a sheathed multi-wire cable, like CAT5e or something for carrying low load 12v signal. Not only reduce the scatter of wire, but make running it much easier. Got any suggestions?
Yea, it's kinda fun though to see how complicated you can get it, and still be able to troubleshoot it. 
7-relays
6-noids
5-toggle sws
2-bottle heaters
1-line lock
3-additional indicate lights
2-gauges fuel press/n20 press, both elect
1-LM1 wide band
1-Laptop
2-window sws
1-rpm activation sw
1-1st gear lock out for 2nd/3rd stages
1-purge
2-micro sws
and am certain that I am missing some stuff.
Then coming,
1-two step
1-micro sw activated kenny bell bap
1-3rd stage rpm on indicater light
1-additional purge
1-anything else I can think of to toss in the mix.
Robert
7-relays
6-noids
5-toggle sws
2-bottle heaters
1-line lock
3-additional indicate lights
2-gauges fuel press/n20 press, both elect
1-LM1 wide band
1-Laptop
2-window sws
1-rpm activation sw
1-1st gear lock out for 2nd/3rd stages
1-purge
2-micro sws
and am certain that I am missing some stuff.
Then coming,
1-two step
1-micro sw activated kenny bell bap
1-3rd stage rpm on indicater light
1-additional purge
1-anything else I can think of to toss in the mix.
Robert
Last edited by Robert56; Jun 15, 2006 at 10:55 PM.
Upt, Robert, you listed 1- purge twice you sly lil devil 
You definately got a lot more going on then I do. I actually thought about cutting it all down to one setup, with ProController..only two noids/1 WOT/1 Purge that way. Dunno.
You definately got a lot more going on then I do. I actually thought about cutting it all down to one setup, with ProController..only two noids/1 WOT/1 Purge that way. Dunno.