Hidden Juice?
Thread Starter
Launching!
Joined: Aug 2002
Posts: 231
Likes: 0
From: Ontario, Canada
Hidden Juice? Hey guys.
I want to run juice on my car but we're really strict up here when it comes to roadside inspections and the like. Any good writeups out there on how to almost completely hide a nitrous system on an LS1 setup? Are dry or wet systems the best for this.
I would think a dry system would be the best bet due to a lesser amount of wiring etc. Of course, then you're still going to have something going to the area in and around the MAF somewhere.
A direct port could be plumbed into the bottom of the intake if there's enough room there. I remember seeing this on an old school 350 setup but the valleys in those motors were MUCH larger than ours.
Any tips/pointers? This isn't for racing specifics, it's moreso just for fun without hassle on the street and at the track.
I want to run juice on my car but we're really strict up here when it comes to roadside inspections and the like. Any good writeups out there on how to almost completely hide a nitrous system on an LS1 setup? Are dry or wet systems the best for this.
I would think a dry system would be the best bet due to a lesser amount of wiring etc. Of course, then you're still going to have something going to the area in and around the MAF somewhere.
A direct port could be plumbed into the bottom of the intake if there's enough room there. I remember seeing this on an old school 350 setup but the valleys in those motors were MUCH larger than ours.
Any tips/pointers? This isn't for racing specifics, it's moreso just for fun without hassle on the street and at the track.
http://www.geocities.com/MotorCity/1920/nos.html
I found this one searchin around hope its somethin that could help you out I didnt read the entire thing cause I aint worried about hidden anything.
I found this one searchin around hope its somethin that could help you out I didnt read the entire thing cause I aint worried about hidden anything.
Thread Starter
Launching!
Joined: Aug 2002
Posts: 231
Likes: 0
From: Ontario, Canada
Thanks buddy! Much appreciated. I'm raping the Search button here right now and have come up with this thread so far as well.
https://ls1tech.com/forums/nitrous-oxide/508024-here-s-my-stealthy-install.html
If anyone else finds my thread at least they'll get a bit of a list of links to hit! I like how this one was done!
I'll check out your link now. Thanks again man!
https://ls1tech.com/forums/nitrous-oxide/508024-here-s-my-stealthy-install.html
If anyone else finds my thread at least they'll get a bit of a list of links to hit! I like how this one was done!
I'll check out your link now. Thanks again man!
Trending Topics
Staging Lane
Joined: Apr 2003
Posts: 50
Likes: 0
From: Texas
Originally Posted by CAT3
Get the NX Money Maker Intake...cant go wrong.
Or set it up like the one in my sig
Or set it up like the one in my sig
+1 on Money Maker
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I had a couple of left over parts...
had to buy a few new ones too...
and with Ricky's and Dave's help, I now have this:
Parts include NX nozzle adapter, NX 1/8" NPT to 3/16" compression fitting, NX 52n jet, NOS -3AN to -3AN 90° coupler, Earl's -3AN to -3AN coupler, 8¼" SHO line, two NX -4AN to 1/8" NPT 90° fittings, NX's sweet Lightning solenoid, and an NX bottle pressure thing (kinda too big!). Then there's the obvious feed line, bottle, and remote opener in the back.
Honestly, I hate that it's hidden 'cause I love the way that looks! I've never used it, nor have I had to, but I think I should test it one day to make sure it works...
oh yeah, I did copy someone else's idea that I saw on here, so... sorry! It's mine now.
had to buy a few new ones too...
and with Ricky's and Dave's help, I now have this:
Parts include NX nozzle adapter, NX 1/8" NPT to 3/16" compression fitting, NX 52n jet, NOS -3AN to -3AN 90° coupler, Earl's -3AN to -3AN coupler, 8¼" SHO line, two NX -4AN to 1/8" NPT 90° fittings, NX's sweet Lightning solenoid, and an NX bottle pressure thing (kinda too big!). Then there's the obvious feed line, bottle, and remote opener in the back.
Honestly, I hate that it's hidden 'cause I love the way that looks! I've never used it, nor have I had to, but I think I should test it one day to make sure it works...
oh yeah, I did copy someone else's idea that I saw on here, so... sorry! It's mine now.
