BigDB

I have a mechanical WOT switch and for the life of me cant find a sutable spot to mount it. I originaly wanted it on the throttle body but cant find a position for it. Now im looking around the gas pedal and i see and bolt i could use but im worried i might break the switch if i slam the gas pedal down or maybe bend the bracket. any help would be great

227Hawk

iTrader: (1)

You can mount it to the throttle body just takes some bracket tweaking.

Hawk

Z2K_MrJ

If your Car Has the trans Am Wheel Take Out the Damm Mute Button. Make it that aNice way for Push & go

BigDB

no its a standard z28 wheel, no stero controls. anyone with pics? i might have to go with a push button design

Robert56

iTrader: (2)

In the wiring stickies is a pedal wot sw mount pics for f-bods, vettes, and GTO's.
Robert

BigDB

ya iv seen those but unfortunatly none resemble the setup ill have to make. Ima make a braket, just wanted to see what others with camaros did. Ill post a pic when its made, maybe u can put it in the sticky for others later

Robert56

iTrader: (2)

Yes, that would be nice, thanks.
Robert

code4

iTrader: (30)

I put some spacers & longer bolts on the bracket that is connected to the intake so that I could bolt on the micro switch. Here is a pic:

BigDB

thanks code4, thats something i was thinking of doing. the pic really helps. maybe if u get a side pic or angled robert will put it in the sticky possibly thanks

FinalTA

iTrader: (1)

dunno if it helps or not, but this is what I did on my GTO: