My TNT Nitrous Install - Pics! 56K Beware
11-06-2006, 12:05 PM
#1
10 Second Club
Thread Starter
iTrader: (20)
Join Date: Feb 2005
Location: Winston-Salem, NC
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
My TNT Nitrous Install - Pics! 56K Beware Just got the car back from Tick Performance in Mount Airy, NC where it went in for a nitrous install and a set of QA1 Comp-Rs for the front. Needless to say, I'm hooked! The car made 555whp/576rwtq and went 7.0 @ 99.3 this weekend with a 1.56 60'.
On the inside:
Notice the shift light:
...but wait, where is the bottle?
Hmmm...
...And of course, the mandatory purge pic:
(I was drying the car and moved the passenger side purge line, which is why it's crooked. Fixing that this weekend.
)
And my favorite shot of the weekend:
Please excuse the general dirtiness of the car - it is getting a complete detail this weekend, from top to bottom.
Special thanks to Tick Performance for their clean install and attention to detail! Can't beat their service or pricing. Also thanks to Alvin @ PCMForLess for tuning the car and making sure everything was safe!! Time to bolt on the skinnies and see if I can't get that ET down some.
I'm a nitrous addict!!
On the inside:
Notice the shift light:
...but wait, where is the bottle?
Hmmm...
...And of course, the mandatory purge pic:
(I was drying the car and moved the passenger side purge line, which is why it's crooked. Fixing that this weekend.
) And my favorite shot of the weekend:
Please excuse the general dirtiness of the car - it is getting a complete detail this weekend, from top to bottom.
Special thanks to Tick Performance for their clean install and attention to detail! Can't beat their service or pricing. Also thanks to Alvin @ PCMForLess for tuning the car and making sure everything was safe!! Time to bolt on the skinnies and see if I can't get that ET down some.
I'm a nitrous addict!!
11-06-2006, 12:13 PM
#2
TECH Apprentice
iTrader: (18)
Join Date: Aug 2005
Location: Southern Ohio
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Clean install. Car looks great!!! I agree with you on the last pic What size of shot are you running? My car is damn near identical to your setup except I'm using the NX MAF kit and I have PRC heads.
Also, is that an "in-car-cam" on the passenger A-pillar? Just curious
What size of shot are you running? My car is damn near identical to your setup except I'm using the NX MAF kit and I have PRC heads. Also, is that an "in-car-cam" on the passenger A-pillar? Just curious
11-06-2006, 12:20 PM
#3
10 Second Club
Thread Starter
iTrader: (20)
Join Date: Feb 2005
Location: Winston-Salem, NC
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
Thank you! The TNT kit is jetted for 150hp, and makes exactly 150whp on the dyno.
Your car sounds sick! Heads are in my winter plans.
That is an in car camera that is stuck to the passenger side window - unfortunately I missed 2nd gear on that pass so the video is pretty uneventful.
Your car sounds sick! Heads are in my winter plans.
That is an in car camera that is stuck to the passenger side window - unfortunately I missed 2nd gear on that pass so the video is pretty uneventful.
Trending Topics
11-06-2006, 05:17 PM
#10
10 Second Club
Thread Starter
iTrader: (20)
Join Date: Feb 2005
Location: Winston-Salem, NC
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for the compliments guys! Yes, it does feel good. Best 60' is 1.5xx, hoping to get that down to 1.4xx shortly. TNT uses a power ring that the nozzles go in to - check it out at http://www.nitrous-power.com I will shoot you a PM with the list - it is mostly UMI stuff. Great quality, great price. Thank you! That is your bottle bracket in the spare tire well back there. VERY high quality piece. Thanks!!
Originally Posted by Shuck
Nice setup, not to sound picky but I would like to see a close up pic of your nozzle if you have one.
Originally Posted by 1fastz28nx
Would you care to go into more detail on your suspension setup? What springs/shocks? etc... That's my winter project!
Originally Posted by 860 Performance
Sure is nice to see a car in street trim, with at least 1 wheel up!
Good job!
Good job!
BOSS APPROVED!
11-07-2006, 08:54 AM
#16
10 Second Club
Thread Starter
iTrader: (20)
Join Date: Feb 2005
Location: Winston-Salem, NC
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
Thanks again guys!! Speed Engineering makes it. Their usual one says "LS1", but I had them make me one that says "N2O". Its a very nice piece, all pre-wired and everything.
http://speed-eng.com/store/product_i...oducts_id=6674
Originally Posted by WS6FTW
Who makes the switch pannel you have?
http://speed-eng.com/store/product_i...oducts_id=6674
