Ok just finishing up a new set up on my car and everything hooked to the panel is working correctly. When I turn on the heater the large light at the top of the switch lights up. when I arm the n20 system I get no light but it works. My best guess is that when the heater is on the lower light should be on and when the n20 is armed the large light should be on. Anyone have a picture of the back of there nx switch panel. I saw one a few weeks ago but can't find it again in the search. i have double checked all my connections.

 

On that switch there is a large light and a small. The small is pretty hard to see in the day time.
If you want the large light to be the system, just switch the heater controll and the system wires on that switch.

Now only one light should be on at a time if all is wired up, like instructions.
http://www.nitrousexpress.com/Instru...witchpanel.pdf
Ricky

 

Ok I wired it up as per directions so the large light is suppose to be the heater and the small light is the arm light per default?

 

What no one wants to guess? Well I took the switch apart piece of cake nothing to them. I feel as the bulb is shot and it can't be changed. everything works as should.

 

james, you find a place to get replacement parts? i need a momentary switch for one of mine now for the trans brake

 

Yes I found replacement parts.