Nice job Beer on my new switch panel!
#1
Thread Starter
TECH Senior Member
iTrader: (42)
Joined: Dec 2004
Posts: 5,063
Likes: 0
From: Tomball/Nacogdoches TX
Nice job Beer on my new switch panel!
What an amazing job Beer did! Couldn't ask for more. He really hooked me up on this one and got it to me in no time. He custom made it for my needs and had no problem doing so. If anyone wants to go with a new panel with really top notch quality, go with Beer!
Don't mind the wires, they have been fixed. The first two toggle switches will also be changed to blue once I track some down.
Thanks again Beer!
Don't mind the wires, they have been fixed. The first two toggle switches will also be changed to blue once I track some down.
Thanks again Beer!
#3
Thanks Brian and Chad from GLMS to get the measurements for the Camaro for me. I finally broke down and bought a Camaro console to get pics and be able to measure for tweaking them.
The spacing on the switch's is based on the open hole in the factory console.
The panel is designed so no damage has to be done to the factory console, should you remove the nitrous. The Fan Switch utilizes the factory lighter hole.
If you are willing to cut up your console that is not a problem
Here is one that requires the console to be cut up
and another with a 2 1/16 cutout
The spacing on the switch's is based on the open hole in the factory console.
The panel is designed so no damage has to be done to the factory console, should you remove the nitrous. The Fan Switch utilizes the factory lighter hole.
If you are willing to cut up your console that is not a problem
Here is one that requires the console to be cut up
and another with a 2 1/16 cutout
Last edited by Beer99C5; 11-28-2006 at 12:11 PM.