Who makes plates?
Thread Starter
10 Second Club
iTrader: (11)
Joined: Apr 2006
Posts: 2,526
Likes: 1
From: Ashland, KY
Who makes plates? What companies make EFI plates?
Good/bad of them?
I'm considering the HSW wet kit that's on sale, but I want to use a plate. Is this just a matter of buying a plate and hooking it up, or is there more hardware involved?
Good/bad of them?
I'm considering the HSW wet kit that's on sale, but I want to use a plate. Is this just a matter of buying a plate and hooking it up, or is there more hardware involved?
Thread Starter
10 Second Club
iTrader: (11)
Joined: Apr 2006
Posts: 2,526
Likes: 1
From: Ashland, KY
Ewww. That's the answer I don't want. I don't doubt the quality. I'm sure it's an awesome piece. But on the site, the price indicates it may be plated with gold, or maybe platinum.
you should be able to use any plate with any wet kit. I have nitro dave's plate, and basically you just hook up the plate to the lines coming out of your solenoids, instead of using nozzles. Basically, the only stuff I had to do for my plate was put a throttle cable bracket in there, and trim off my bellows a little bit. That was about it, if you need to know anything else PM me.
Guest
Posts: n/a
I understand that our plates cost a little more than the others...we carry the NOS plate also.
Our plates were designed to accept the OEM o-ring style gaskets instead of a paper gasket, they have also been flow tested up to 400hp. They come with everythin needed to install on the vehicle.
Our plates were designed to accept the OEM o-ring style gaskets instead of a paper gasket, they have also been flow tested up to 400hp. They come with everythin needed to install on the vehicle.
Trending Topics
I have Dave's plate, I posted a video of bench flowing it (easily found in a search), look at that vid and compare that to a nozzle in air duct. A conversion kit is what $225 for a F-Body? Its a nice piece and was a bolt on that worked right out of the box for me. Glad I went with a plate for my first wet system.
The NOS plates the guys I have compared notes with are pleased with their systems, the HSW looks as innovative as Daves plate with the 360 spray coverage (are they released yet?). I suspect the Nitrous Direct LS1 plate will look similiar to their LS2 plates and the post I have read on the ND LS2 plates have had great feedback as well.
The NOS plates the guys I have compared notes with are pleased with their systems, the HSW looks as innovative as Daves plate with the 360 spray coverage (are they released yet?). I suspect the Nitrous Direct LS1 plate will look similiar to their LS2 plates and the post I have read on the ND LS2 plates have had great feedback as well.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by N4cer
Ewww. That's the answer I don't want. I don't doubt the quality. I'm sure it's an awesome piece. But on the site, the price indicates it may be plated with gold, or maybe platinum.
Check out this post.
https://ls1tech.com/forums/showthrea...compares+plate
Dave
Originally Posted by Robert56@NitrousDirect
Is that a NOS plate Beer?
Robert
Robert
To an experienced and seasoned Nitrous hand like yourself, well, I will just assume you left your reading glasses somewhere, and your memory is failing a bit, and I would change the subject to "hey Robert whats the latest on the CF LS1/LS6 plate? That going to be released when it stops raining in Seattle?
LOL, just teasing ya Robert
Originally Posted by Beer99C5
To a seventeen year old Ricer yes my reply would be "yo yo kick dis, that is the baddest mostest kick azz fukin Nos plate in da Biz"...
To an experienced and seasoned Nitrous hand like yourself, well, I will just assume you left your reading glasses somewhere, and your memory is failing a bit, and I would change the subject to "hey Robert whats the latest on the CF LS1/LS6 plate? That going to be released when it stops raining in Seattle?
LOL, just teasing ya Robert
To an experienced and seasoned Nitrous hand like yourself, well, I will just assume you left your reading glasses somewhere, and your memory is failing a bit, and I would change the subject to "hey Robert whats the latest on the CF LS1/LS6 plate? That going to be released when it stops raining in Seattle?
LOL, just teasing ya Robert
Robert
