Might be adding nitrous later.. Need imput.
Thread Starter
11 Second Club
iTrader: (6)
Joined: Aug 2005
Posts: 427
Likes: 0
From: Lincolnwood, IL
Might be adding nitrous later.. Need imput. Mods listed below.
I will be upgrading my cam to the one listed in the mods list. After that i want to see what i will run. My best on DR's is 11.9x with a 1.74 60". If i were to add maybe a 75 or 100 shot what do you think i can run?
MODS
Mods:
Mac Filter
Hooker Cat-back
Hooker O/R Y
Hooker comp LT's (EGR Delete)
Comp Cam (.588/.581 , .228/.222 114.5LSA) OLD CAM
Comp Cam (231 237 .589 .595 112LSA) NEW CAM
Vig 3600 Stall
Ls6 Intake
Lid
Eibach Springs
Bilstein Struts/shocks
Car made 380rwhp/379rwtq (w/ before cam)
I will be upgrading my cam to the one listed in the mods list. After that i want to see what i will run. My best on DR's is 11.9x with a 1.74 60". If i were to add maybe a 75 or 100 shot what do you think i can run?
MODS
Mods:
Mac Filter
Hooker Cat-back
Hooker O/R Y
Hooker comp LT's (EGR Delete)
Comp Cam (.588/.581 , .228/.222 114.5LSA) OLD CAM
Comp Cam (231 237 .589 .595 112LSA) NEW CAM
Vig 3600 Stall
Ls6 Intake
Lid
Eibach Springs
Bilstein Struts/shocks
Car made 380rwhp/379rwtq (w/ before cam)
do you think your rear end will hold?Im cammed and heads will be here in the next few days and im an A4.Im thinking Ill be around 395-400 rwhp(small cam)My wife is buying me a Harris N20 kit for christmas and was wondering if I can do a 75shot and not worry about the rear.what do you guys think?sorry to hijack this thread
Originally Posted by john563
do you think your rear end will hold?Im cammed and heads will be here in the next few days and im an A4.Im thinking Ill be around 395-400 rwhp(small cam)My wife is buying me a Harris N20 kit for christmas and was wondering if I can do a 75shot and not worry about the rear.what do you guys think?sorry to hijack this thread
Originally Posted by CAT3
Rearends break most the time from hooking on the line. If you walk it out the hole then squeeze into it you should be fine. I went thru 2 stock rears, and finally went to a 9". A4 for a while, then went to A3 just before the 2nd stocker blew, and I always sprayed out the hole, hooking to a decent 1.4-1.5 short and fordloads of passes.
low 11s high 10s with a 12bolt and good slicks. I have very simmilar mods and I plan on running 10s on a hundred shot. With some good suspension mods and a few weight reductions you sould be mid 11s without the spray.
Thread Starter
11 Second Club
iTrader: (6)
Joined: Aug 2005
Posts: 427
Likes: 0
From: Lincolnwood, IL
Originally Posted by LS1SpeedAddict
low 11s high 10s with a 12bolt and good slicks. I have very simmilar mods and I plan on running 10s on a hundred shot. With some good suspension mods and a few weight reductions you sould be mid 11s without the spray.
Trending Topics
Originally Posted by john563
not that I condone street racing or anything like that,but lets say im driving with it armed,but not at wot and floor it to pass someone I should be okay?I dont plan on using it from a dead stop until i get a 9inch and if i do use it at the track(on the 10 bolt) ill set it up on a 1second delay.Will the 10 bolt hold in these types oh situations til I get the 9 inch?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
