Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Nitrous help

Thread Tools
 
Search this Thread
 
Old Dec 16, 2006 | 09:34 AM
  #1  
mdacton's Avatar
Thread Starter
9 Second Club
iTrader: (3)
 
Joined: Nov 2006
Posts: 644
Likes: 1
From: Goochland, Va.
Default Nitrous help

Just bought a wet kit from HSW
car is a lt1 fresh motor with 40 passes th350 w/4500 stall and 4.57 gear with a 28"

If I try to spray a 75-100 shot do you think that converter will flash too hi?
This is also my first time sprayiung anything I have done lots of searching and plan on running all the safety items and a window switch, Just don't want any big surprises
Reply
Old Dec 16, 2006 | 11:58 AM
  #2  
98redorangeta's Avatar
12 Second Club
iTrader: (10)
 
Joined: Sep 2005
Posts: 948
Likes: 0
From: From Ohio now in that state up north
Default

Well first too high is a relative term. Is the converter built for nitrous i am assuming not? A 75-100 shot shouldent be too much of a change but again thats relative it depends on you power band most would pick a smaller converter with nitrous though.
Reply
Old Dec 16, 2006 | 12:18 PM
  #3  
mdacton's Avatar
Thread Starter
9 Second Club
iTrader: (3)
 
Joined: Nov 2006
Posts: 644
Likes: 1
From: Goochland, Va.
Default

the converter can handle the nitrous but when it was selected for the car i had never concidered spraying it.

Btw the car makes less then 400hp at the wheels
Reply




All times are GMT -5. The time now is 04:50 AM.