Hey guys i am new here, i live in Australia and i have a LS1 powered vu ute and i have a cam and head combo on it which produces 424HP at the wheels and i just purchased a zex dry nitrous kit, this is what i got in the


bottle, lines, purge solenoid?, gauge, purple box.
but i want to run a wet kit on this so what else do i need. hope you guys can help me out as no one in aus can really help me also i dont have any electrical stuff for it?
will it be safe to run a 100hp shot?
thanks again

 

Have a look on either Comp Cams or the Zex web sites and see if they offer a dry to wet upgrade kit.

 

Thnaks mate but will it work still if i just go get a fuel solenoid and hook it up???? anyone know and what if its a not a zex solenoid it wont matter will it?

 

gotta get the right jets and mount the nozzle after the mas air. get on there site,i know zex makes a wet kit

 

Not sure how well that zex kit works but I would suggest getting rid of the box and going with a conversion kit from one of the sponsors. To convert a dry kit over to wet.

 

I just responded to your pm. I will respond here as well.

We need to know the part number for the system you have. We can probley make it work for your application if you ant to stay dry. Zex also makes a dry to wet conversion for there systems. So that is an option as well.
Dave

 

ok thanks alot is that the patent #5,967,099???
i think i should just go with a wet kit as this dry kit has a 34 jet in one of the intake lines and i dont know what the go is with that?

 

i am pretty sure this is the kit i got guys??? 82015 v8 dry kit
http://www.zex.com/Base/Instructions/ZEX116.pdf

 

???? anyone know

 

Guys Can I Just Buy A Fuel Solenoid And Hook It Up And Still Use This Box So I Can Have A Wet Kit?????