Nitrous and pressure gauges.
Nitrous and pressure gauges. Is it ideal to have a gauge on the bottle and a gauge up front? Since I am in a Corvette it is just as easy to look back and see the pressure 
Do I waste my money on a digital gauge for up front?
Do I waste my money on a digital gauge for up front? unless you use some angle fittings, you shouldn't be able to see the gauge from the seat. It's on the back side of the bottle and if it's facing you, most bottles would be in the wrong position.
It would seem ideally, the pressure you're most concerned about would be the at the solenoid. Have an electronic pressure gauge up front with the sender mounted right at the solenoid.
Teching In
Joined: Feb 2007
Posts: 41
Likes: 0
From: I got a fever, and the only cure is more cowbells!!
Ditto, having an extra gauge up front is important. You need to know what your line pressure is. If it's too high you can lean your engine out, or two low you go pig rich.
www.dynotune.org they make the best stuff on earth, for a good price.
www.dynotune.org they make the best stuff on earth, for a good price.
That makes sense guys. With the position of both my bottles I will be able to view the gauges. Since I want this system to be as full proof as possible, it sounds like a digital gauge from Dynotune is in order. 
Exactly what I did. I have dual bottles mounted on hump between rear seats, 90 deg angled fittings to point the mechanical pressure gages toward the front of the car (that way I can see them), and a Dynotune Rectangular Pressure Gage reading from engine compartment up at nitrous solenoid.
The gage will be custom mounted in a 'Beer' Switch Panel as soon as it is done
The gage will be custom mounted in a 'Beer' Switch Panel as soon as it is done
Trending Topics
I did a bottle gauge and a Pillar gauge. I cannot see the the bottle from the drivers seat in my vert.
Here is an option if you dont want to waste a pillar spot, availible at DynoTune.
Here is a F-Body version that will be availible likely end of March @ Dynotune.
Here is an option if you dont want to waste a pillar spot, availible at DynoTune.
Here is a F-Body version that will be availible likely end of March @ Dynotune.
Last edited by Beer99C5; Feb 23, 2007 at 09:28 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
