CGA-660 bottle valve
#1
CGA-660 bottle valve
I'm looking for a good used or new bottle valve listed below. My supplier will not fill my bottle anymore without this valve.
High Flow Nitrous Valve
CGA-660
With -8 AN Blow Down Fitting
PLEASE let me know what you have priced shipped to Keyser, WV 26726
Thanks, have a great Sunday and God Bless Our Troops and the U.S.,
John Junkins
C#1-304-790-0940
jwcej@msn.com
And can anyone tell me the difference??
High Flow Nitrous Valve
CGA-660
With -8 AN Blow Down Fitting
PLEASE let me know what you have priced shipped to Keyser, WV 26726
Thanks, have a great Sunday and God Bless Our Troops and the U.S.,
John Junkins
C#1-304-790-0940
jwcej@msn.com
And can anyone tell me the difference??
#3
Any of the nitrous sponsors will have them.
What valve do you have that your supplier wont use?
It's the orginial valve that came on my ZEX kit.
I was told my valve is the same one that they use to supply the nitrous. They also said it only a in house policy not any law BS..
Thanks Again,
John Junkins
What valve do you have that your supplier wont use?
It's the orginial valve that came on my ZEX kit.
I was told my valve is the same one that they use to supply the nitrous. They also said it only a in house policy not any law BS..
Thanks Again,
John Junkins
#5
I think I would try a different place to fill.
However We carry the NOS style 660 valves. Let me know if I can help.
Dave
Dave, I would but every supplier keeps referring me back to the same place.
How much is the valve? I've purchase from you before. PLEASE let me know.
Thanks Again, have a safe 4th and God Bless Our Troops and the U.S.,
John Junkins
However We carry the NOS style 660 valves. Let me know if I can help.
Dave
Dave, I would but every supplier keeps referring me back to the same place.
How much is the valve? I've purchase from you before. PLEASE let me know.
Thanks Again, have a safe 4th and God Bless Our Troops and the U.S.,
John Junkins
#6
FormerVendor
iTrader: (25)
John,
We offer the standard NOS Hi-Flow valve here
http://www.nitrousoutlet.com/catalog...roduct_id=1800
Then the upgraded model is here. It has accessory ports in the side of the valve.
http://www.nitrousoutlet.com/catalog...roduct_id=1798
These are both for 10lb bottles.
Dave
We offer the standard NOS Hi-Flow valve here
http://www.nitrousoutlet.com/catalog...roduct_id=1800
Then the upgraded model is here. It has accessory ports in the side of the valve.
http://www.nitrousoutlet.com/catalog...roduct_id=1798
These are both for 10lb bottles.
Dave
Trending Topics
#9
Dave,
The supplier is telling me, my valve is the same valve that they supply the nitrous plus with. And in return I could use mine to supply someone elses OR Some idiot could use it to huff. But I don't really know what the difference is between the two different valves.
Thanks,
John Junkins
The supplier is telling me, my valve is the same valve that they supply the nitrous plus with. And in return I could use mine to supply someone elses OR Some idiot could use it to huff. But I don't really know what the difference is between the two different valves.
Thanks,
John Junkins
Last edited by John Junkins; 07-03-2007 at 07:57 PM.
#10
FormerVendor
iTrader: (25)
John,
I hate to see you have to buy something because some one has no idea what they are talking about. You can transfer the nitrous no mater what valve you have. The Zex system uses a 326 style valve which is similiar to a medical style valve. It is a compression seal with a bottle nut and nipple.
The 660 style valve uses a single bottle nut with a teflon gasket to seal it. I personally like the 326 valves better do to being able to minipulate the posistion to which the nipple stops.
As far as filling them either valve will work. I would be willing to call the place for you and see what in the world he is talking about if you would like.
Dave
I hate to see you have to buy something because some one has no idea what they are talking about. You can transfer the nitrous no mater what valve you have. The Zex system uses a 326 style valve which is similiar to a medical style valve. It is a compression seal with a bottle nut and nipple.
The 660 style valve uses a single bottle nut with a teflon gasket to seal it. I personally like the 326 valves better do to being able to minipulate the posistion to which the nipple stops.
As far as filling them either valve will work. I would be willing to call the place for you and see what in the world he is talking about if you would like.
Dave
#11
Dave,
I would really appreciate it. I would have to drive 1-2 hours to get it filled. I spoke to another person whom has had their bottle filled there. He races 4 wheelers and with his bottle only having a 4an fitting they told him the same
thing. The company is Wilson Supply Company 1-301-729-2515
Thanks Again,
John Junkins
I would really appreciate it. I would have to drive 1-2 hours to get it filled. I spoke to another person whom has had their bottle filled there. He races 4 wheelers and with his bottle only having a 4an fitting they told him the same
thing. The company is Wilson Supply Company 1-301-729-2515
Thanks Again,
John Junkins