Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

nitrous with stock gears and stall

Thread Tools
 
Search this Thread
 
Old Jul 3, 2007 | 08:07 PM
  #1  
Black99TransAm's Avatar
Thread Starter
TECH Apprentice
iTrader: (16)
 
Joined: Jul 2005
Posts: 348
Likes: 1
From: Sheldon, IA
Default nitrous with stock gears and stall

hey everyone, im getting the bottle installed this weekend. im planning on a 100 shot with the nitrous express kit. the car is a 2001 z 28 with 61000 miles. the trans is stock(Auto), it has stock gears, (2.73s) and the car just has bolt ons. (Headers, y, catback, lid/smoothbellows, ported maf) i have a window switch, fuel pressure safety switch, plugs and of course the complete kit. im also installing a blow down tube, bottle warmer, and a purge. im just wondering how well the nitrous will do with the stock gears,stall. trans and what all you all would recomend if i forgot anything... and what to do after first time spraying it to make sure its running good a/f ratio.

thanks
Reply
Old Jul 3, 2007 | 09:13 PM
  #2  
Hennytime's Avatar
12 Second Club
iTrader: (33)
 
Joined: Jan 2005
Posts: 2,584
Likes: 0
From: winter springs, fl
Default

i did it, and id recommend hitting it on the dyno and dialing in your a/f. thats key. then take it to the track and make an n/a pass and a nitrous pass. with your drivetrain you should pick up about 8 tenths and 8-10mph if running right
Reply
Old Jul 3, 2007 | 11:07 PM
  #3  
bonestockz06's Avatar
Staging Lane
iTrader: (6)
 
Joined: May 2007
Posts: 79
Likes: 0
From: NJ
Default

Your stock drivetrain will hold up just fine with 100 shot once A/F mixture is dialed in. Goodluck and enjoy your added power.
Reply




All times are GMT -5. The time now is 08:14 AM.