First time out on spray!!!!!
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
First time out on spray!!!!! well, raced with my compleat new setup. did 2 motor passes, car needs alot more tuning with the solid roller, but with the 125 jets and pig fat with low timming, the car went
9.6 @ 140 with a 1.39 60'
im super happy, i see this thing running bottom 9's with a 150-175 shot
i did about 7 passes yesterday and all got better and better, and i did very small changes each time, i need a few more track visits to tune in the motor/nitrous, then a few to get the suspention working, and ill be good.
i fell asleep at the tree tho, i will need some practice there as well, im a little rusty, been a while since i raced
anyway, vids to come.
9.6 @ 140 with a 1.39 60'
im super happy, i see this thing running bottom 9's with a 150-175 shot
i did about 7 passes yesterday and all got better and better, and i did very small changes each time, i need a few more track visits to tune in the motor/nitrous, then a few to get the suspention working, and ill be good.
i fell asleep at the tree tho, i will need some practice there as well, im a little rusty, been a while since i raced
anyway, vids to come.
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
thanks guys, im real happy so far.
im going to try to make the next trip or 2 to the track all motor passes while logging the runs to try to tune the car.
then once its tuned in on motor, i will spray it again with the timming kicked a tad and dial in the tune for spray, then onto suspention.
i have a month befor my next race, so im hoping get to the track for the next 3 fridays and should be in a pretty good spot.
setup is a 427 lsx solid roller.
fast 90 ported m\by vengence, afr 225 heads (all custom for big springs)
im going to try to make the next trip or 2 to the track all motor passes while logging the runs to try to tune the car.
then once its tuned in on motor, i will spray it again with the timming kicked a tad and dial in the tune for spray, then onto suspention.
i have a month befor my next race, so im hoping get to the track for the next 3 fridays and should be in a pretty good spot.
setup is a 427 lsx solid roller.
fast 90 ported m\by vengence, afr 225 heads (all custom for big springs)
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by NXZ28
When my car grows up I want it to be just like yours. What did it run on motor with the new solid roller?
i was off on the tune big time, and it was first time out with the 2 step, so im going to try this weekend to tune it in better on motor.
the car picked up for sure, but i have a bog out of the hole do to somthing with the tune.
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by camaronut502
Could you post a full run down of your cars setup or do you have a website or anything with it already posted? Thanks!
Matt
Matt
what do you want to know?
