Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

leaking bottle

Thread Tools
 
Search this Thread
 
Old 09-22-2007, 05:41 PM
  #1  
Launching!
Thread Starter
iTrader: (9)
 
v8juice's Avatar
 
Join Date: Feb 2004
Location: Virginia
Posts: 237
Likes: 0
Received 0 Likes on 0 Posts

Default leaking bottle

I have had this happen twice.I filled the botlle and hit it once or twice for a short amount of time.The 2 gauges i have say there is still about 750 or better psi in the tank.I shut the valve and park the car.a couple of days later the tank is empty. the next time it sat for 3 or 4 weeks and i would check it every few days and the pressure was good.Then one day I go out and the tank is empty again.Where is this leaking??Oh,its is a NOS 15 pd bottle with the hi flo valve.

Thanks
Old 09-23-2007, 04:55 PM
  #2  
Launching!
Thread Starter
iTrader: (9)
 
v8juice's Avatar
 
Join Date: Feb 2004
Location: Virginia
Posts: 237
Likes: 0
Received 0 Likes on 0 Posts

Default

Anybody??
Old 09-23-2007, 05:07 PM
  #3  
10 Second Club
iTrader: (11)
 
purdueranger's Avatar
 
Join Date: Apr 2006
Location: Indy, IN
Posts: 858
Likes: 0
Received 0 Likes on 0 Posts
Default

was the bottle new when you bought it? are you sure you are shutting the valve all the way? Do you have a remote bottle opener?
Old 09-23-2007, 05:12 PM
  #4  
TECH Fanatic
iTrader: (7)
 
b00sted's Avatar
 
Join Date: Jun 2005
Location: Chicago
Posts: 1,109
Received 0 Likes on 0 Posts

Default

Crank the bottle valve tight otherwise it'll leak. Check the burst disk and make sure that's all tight. The whole valve assembly threads into the bottle...It's unlikely, but could be leaking there.
Old 09-23-2007, 05:38 PM
  #5  
10 Second Club
iTrader: (38)
 
myfast70's Avatar
 
Join Date: Oct 2006
Location: Phoenix, Az
Posts: 1,259
Likes: 0
Received 0 Likes on 0 Posts

Default

You can try putting some dish soap and water in a spray bottle and spray all of the fittings for the nitrous and see if you find any bubbles anywhere.
Old 09-24-2007, 02:05 PM
  #6  
TECH Enthusiast
iTrader: (2)
 
dave70's Avatar
 
Join Date: Dec 2004
Location: Thibodaux Louisiana
Posts: 630
Likes: 0
Received 0 Likes on 0 Posts

Default

check the gauge where it threads into the bottle. This is on the psi side of the valve and will leak even if the valve is shut tightly. Also the gauge itself could leak.Check everything with soapy water.
Old 09-24-2007, 10:59 PM
  #7  
On The Tree
 
ROLLN's Avatar
 
Join Date: Feb 2006
Location: ILLINOIS
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
Default

i thought i was the only one that had a bottle leak. i also had the 15lb nos bottle. mine leaked from the brass hex valve. i ended up getting a new kit so i never fixed it.
Old 09-25-2007, 06:02 PM
  #8  
Launching!
Thread Starter
iTrader: (9)
 
v8juice's Avatar
 
Join Date: Feb 2004
Location: Virginia
Posts: 237
Likes: 0
Received 0 Likes on 0 Posts

Default

bottle was new,there is no gauge on it and I have replaced the burst disk.Also no bottle opener installed and I twist it TIGHT when I shut it.The bitch is it doesnt leak all the time,just sometimes.




All times are GMT -5. The time now is 07:24 AM.