im helping to put a bottle on a 03 mach1 5-speed 2moro.

we are prolly gonna run just a 75shot wet. hes getting colder plugs.

car has, OR x-pipe, cat-back, and intake and thats it.

is there anything else that needs to be done to make sure this thing is safe.

im gonna try and get him to keep his bottle pressures around 900 to keep it safe(r) for a while.

 

i put a kit on an 03 Mach 1 two weeks ago. all he has is a cat-back, air intake, and colder plugs. sprayed a 100 shot a few times, then bumped it up to 125. (wet shot). wired it with an activation switch and push button.

 

Generally speaking the kit would be safer with some devices, window switch/wot switch, gauge or way to monitor a/f, FPSS (mixed reviews)...

 

I think the mach 1 have the same shortblock as the 03 cobras if so i think it would safe for sure.just check a/f ratio for sure while spraying

 

I thought the Machs have the same short block as the N/A Cobras.....

 

machs have aluminum 4v motors vs the cobras iron 4v, same forged internals though.

 

Are you sure about the forged internals on the Mach?

 

only thing that is forged on a mach is the crank if its a 5 speed

 

correct

 

tech specs for a mach 1 http://mach1registry.com/Specs/Specs.htm

 

The machs have powdered metal rods, hypereutectic pistons and a forged crank.

I second the wot switch + window switch.

Tony