Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

spray a stock LS1

Old Jun 10, 2003 | 10:53 AM
  #1  
Fast Eddie's 02 T/A vert.'s Avatar
Thread Starter
TECH Fanatic
 
Joined: Oct 2002
Posts: 1,068
Likes: 0
From: Seattle,Wa.
Default spray a stock LS1

Can i use the bottle on a 02 T/A w/lid and a catback.
Reply
Old Jun 10, 2003 | 10:57 AM
  #2  
BlackEcho's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Feb 2003
Posts: 370
Likes: 0
From: Houston, TX
Default Re: spray a stock LS1

i believe so as long as you use a conservative amout. I would go no further than a 100 shot
Reply
Old Jun 10, 2003 | 03:41 PM
  #3  
CAT3's Avatar
Restricted User
iTrader: (9)
 
Joined: Sep 2002
Posts: 7,603
Likes: 0
From: Sierra Vista, AZ
Default Re: spray a stock LS1

Yes you can, I have sprayed dozens of 100shot bottles and recently after a walbro255l pump install a couple bottle @ 150. Use the appropriate safety measures, be conservative and if available auto-tap to check A/F and have fun.
Reply
Old Jun 10, 2003 | 05:29 PM
  #4  
needmoremoney's Avatar
TECH Regular
 
Joined: Mar 2003
Posts: 449
Likes: 0
From: W.P.B
Default Re: spray a stock LS1

Go for it, and have fun.
Reply
Old Jun 10, 2003 | 05:52 PM
  #5  
DJ's Avatar
DJ
Staging Lane
 
Joined: Feb 2002
Posts: 97
Likes: 0
From: Athens, Ga
Default Re: spray a stock LS1

i'm running open lines with the 5177 powershots, and everything is holding up just fine. Just be sure to use atap at the least, and a wideband if possible. A MAF-T might be needed if you go up from 125 jets, just read your 02's and change your plugs. Good luck, later-dj
Reply
Old Jun 11, 2003 | 10:46 PM
  #6  
jhelms's Avatar
TECH Fanatic
iTrader: (2)
 
Joined: Nov 2001
Posts: 1,805
Likes: 0
From: Columbus, GA
Default Re: spray a stock LS1

i'm running open lines with the 5177 powershots, and everything is holding up just fine. Just be sure to use atap at the least, and a wideband if possible. A MAF-T might be needed if you go up from 125 jets, just read your 02's and change your plugs. Good luck, later-dj

Cool... what gains are you seeing on the dyno with those open 5177's?
Reply
Old Jun 11, 2003 | 11:07 PM
  #7  
The Guy in MY 99TA's Avatar
TECH Addict
 
Joined: Jan 2002
Posts: 2,950
Likes: 0
From: Magee MS
Default Re: spray a stock LS1

I was wondering the SAME thing...

Wouldn't that be around a 600 shot or more?

Josh S.
Reply
Old Jun 12, 2003 | 08:06 PM
  #8  
B18B1LS1's Avatar
TECH Fanatic
20 Year Member
iTrader: (12)
 
Joined: Nov 2001
Posts: 1,711
Likes: 6
From: Lawrenceville, Ga
Default Re: spray a stock LS1

The powershot solenoids have a VERY small orfice. Wide open they flow enough nitrous to make around 150 rwhp on a bolt-on car.

Jeffrey
Reply
Old Jun 12, 2003 | 08:40 PM
  #9  
red jet's Avatar
Staging Lane
 
Joined: Feb 2003
Posts: 76
Likes: 0
From: Houston, TX
Default Re: spray a stock LS1

no problem I sprayed 125 single nozzle dry with just a "MTI" lid and borla cat back for a long time now the car is sold with just over 30k miles and drivetrain is still holding up. oh by the way spraying of the line I went 11.71 @ 119mph with just a lid and cat-back have fun and enjoy spanking
vipers and 03's cobra's cause I did!!!!
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:36 PM.