Launching on n2o w/ a M6
11-02-2007, 08:23 AM
#21
Banging some gears
iTrader: (10)
Join Date: Sep 2005
Location: Mississippi
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
i follow this routine....
1. Burnout
2.Activate kit, purge kit through motor during burnout
3.5 grand clutch drop
no window switch just a WOT switch prayin i dont miss a gear! KNOCK on wood i havent yet!
1. Burnout
2.Activate kit, purge kit through motor during burnout
3.5 grand clutch drop
no window switch just a WOT switch prayin i dont miss a gear! KNOCK on wood i havent yet!
11-02-2007, 03:47 PM
#27
10 Second Club
iTrader: (3)
Join Date: Mar 2005
Location: Rancho Cucamonga, CA
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
i dont know if this helps, but i am a t-rex 243 car with a m6 and i sprayed 100 shot out of the hole. i just heated my et streets and revved to about 5800 rpm turned the switch on and launched. stock rear held together for awhile.
11-02-2007, 04:31 PM
#28
10 Second Club
iTrader: (14)
Join Date: Jul 2006
Location: brimfield, illinois
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
I have the cam in my sig with stock heads. I shoot 150 out of the hole with a msd window switch and wot switch on the throttle body. With only suspension mods being a umi torque arm and 1 year old comp engineering rear shocks with used m/t et street radials its running pretty decent.
