Nitrous with BAP ?
#1
TECH Resident
Thread Starter
iTrader: (22)
Join Date: Oct 2006
Location: Shreveport, Louisiana
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Nitrous with BAP ?
My stock fuel pump will be fine with just my heads/cam but i want to add a BAP that I can activate with a switch on my nitrous panel. Has anyone done this? and if so do you have any pics or write-up? Thanks
#2
TECH Senior Member
iTrader: (2)
Get the racetronics hot wire kit for your car and it has dedicated wiring plug for BAP, very simple. This can also up your stock pump by upwards of 20% capacity by suppling highest voltage direct from altenator. you could also do it by a simple relay tied into the wot sw to activate when nitrous is armed.
Robert
Robert
#7
TECH Veteran
iTrader: (33)
Join Date: Nov 2001
Location: Port Richey
Posts: 4,266
Likes: 0
Received 0 Likes
on
0 Posts
be careful with BAP on stock F body pumps...it will kill em quick IMO.
BAP will increase voltage...but its not increasing the voltage to the injectors that increases injector capacity...its the additional pressure provided by the pump that is run at higher voltage. Higher pressure at the same injector duty cycle equals more volume.
BAP will increase voltage...but its not increasing the voltage to the injectors that increases injector capacity...its the additional pressure provided by the pump that is run at higher voltage. Higher pressure at the same injector duty cycle equals more volume.
Trending Topics
#8
TECH Resident
Thread Starter
iTrader: (22)
Join Date: Oct 2006
Location: Shreveport, Louisiana
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
This is for a 02 vette, but it may be the same pump as the F-Body. So if I am running SVO 30# injectors, that flow 36# at our FP, do they flow more when the BAP is turned on?
be careful with BAP on stock F body pumps...it will kill em quick IMO.
BAP will increase voltage...but its not increasing the voltage to the injectors that increases injector capacity...its the additional pressure provided by the pump that is run at higher voltage. Higher pressure at the same injector duty cycle equals more volume.
BAP will increase voltage...but its not increasing the voltage to the injectors that increases injector capacity...its the additional pressure provided by the pump that is run at higher voltage. Higher pressure at the same injector duty cycle equals more volume.
#9
TECH Senior Member
iTrader: (2)
Robert