XX11SECZXX

iTrader: (1)

how much timing should i pull out for a 175 shot on my 383? im running it at between 38-40 degrees total. its 9.8:1 compression.

Robert56

iTrader: (2)

Not to be a dick, but a couple posts down the same question, yours at 2:28 and that one at 12:05.


Robert

thechef

iTrader: (13)

2 degrees per 50hp

Cam72aro

iTrader: (28)

I used to pull 8 on my 14:1 406 with a 250 fogger on it. I rac 36 on motor and pulled 8 through the msd on the gas. I would pull around 5-6 as a starting point. The 2-3 for 50hp is a start but does that mean on a 300 shot to pull 18? No. Read the plug and look at the ground straps for the timing line.

XX11SECZXX

iTrader: (1)

ive got an msd 6 digital so i can pull out the timing when i hit the kit. i was planing on going around 6. thanx

1badA3Z

iTrader: (58)

I have always heard 2 per 50 also,just to be safe!