RamAir02TA77

iTrader: (3)

I have a homeade nitrous kit consisting of nos lines edelbrock nitrous and nos fuel solenoid -4an feedline and -3an lines going to the nozzle. I jetted the kit for 100hp for my 5.0 mustang and when the nitrous turned on at 3000 and ended at like 3200 due to a blown radiator hose (then found out the head gasket blew also) the car already made 330hp and 486 tq it made 240hp and 288tq on motor. It was alittle lean on the hit but then it seemed to straighten out alittle then the head gasket popped. I have the kit jetted for 100 nitrous and 125 fuel. We had this nozzle on a gto and it hit hard then we switched it to the mustang and it hits real hard haha. This nozzle defiently makes big power the orfice size looks pretty big I plan on running a 75 shot again after I get the head gaskets replaced but it will probably still make around 100rw. I may try this nozzle in my ta and see how it works because it seems to work awsome but the flow of it must be rwhp + some maybe someone from HSW can chime in. Good product guys atleast it throws out some good power.

Bullitt4110

iTrader: (31)

I liked mine before I just converted to a plate. I have a black mamba for sale if anyone is interested.

Matt@HSW

iTrader: (14)

The Black Mamba nozzle was designed to perform at both smaller size (35 HP) and larger size shots (300+). There are a few guys running 250+ shots from the single nozzle BF kits.

Matt

RamAir02TA77

iTrader: (3)

Yea I noticed it throws out some good power I may try it out on the ta and see what happens that car can take a bit more spray then the stang well so it seems haha.

PAGregSS

iTrader: (10)

Me too! The Black Mamba worked really well, but I just got my HSW plate. Can't wait to use it.

LS1SpeedAddict

iTrader: (9)

What size jets would you need to run the 35hp shot? And 50hp?

jmill96Z

iTrader: (3)

Does the black mamba have a rounded tip, or jagged? I'm just asking because I have no clue what nozzles I have

TARZAN

iTrader: (12)

http://www.harrisspeedworks.com/shop...cat=265&page=1


Rounded tip...

-Will

TARZAN

iTrader: (12)

at 55 psi fuel, 950 bottle pressure, a .030 nitrous and a .016 fuel should be a 35

same pressure, .037 nitrous and .020 fuel for a 50

I used http://www.robietherobot.com/NitrousJetCalculator.htm FWIW...

-Will

jmill96Z

iTrader: (3)

Thanks

Beaflag VonRathburg

iTrader: (176)

Awesome link!

LS1SpeedAddict

iTrader: (9)

Thanks