Jditlfm

iTrader: (26)

I have been trying to find out how to get to the plunger on NOS cheater solenoids to inspect it. I can get the coil off but after that I'm not sure . With my Dynotune solenoids you can unscrew the post with a screw driver. DO they make a special tool to get to the plunger on these solenoids. Thanks

Randy WS6

iTrader: (69)

The two little dimples under the coil is were you unscrew it you will need to buy or make you a tool to turn it,Be careful there is a o-ring under it

Chris@NitroDaves

This is what you will need to take the solenoid apart

http://www.nitrousoutlet.com/catalog...roduct_id=1515

-Chris

Jditlfm

iTrader: (26)

Thank you for the link i was having a hard time finding that tool.