I have been searching so don't tell me to search, hook me up instead! I recently sold my old nitrous kit, i mean OLD nitrous kit, i wasn't getting the power i should have been and am looking to upgrade. I have an ls1, heads/cam, bolt ons, in a 93 rx7, hood clearance is minimal, from what it looks like the HSW plate might fit on there, i know for sure the nitrous dave and the nos plates wont work, they sit too tall but pics of the HSW kit installed on anything would help me out!!

 

What intake and trottle body do you have?

 

stock ls6

 

It extends just under a half inch above the throttle body.

 

do the noids sit any higher than the plate they way they are mounded in this pics. (those are the ls1/6 mounts supplied right?)

 

I dont have the exact measurements and i dont want to tell you that style bracket will fit for sure. You can always relocate the solenoids else where. Those are the brackets that come with the ls1/ls6 kit. they do seem to sit a lot higher in one of those pictures, but i really think that is just an optical illusion . You can always try to mount them in that location and if it doesnt work it wouldnt be a big deal to mount them else where.

 

I've been meaning to take some pics, but I mounted my noids to the heads. I just modified the brackets that came with the kit. I'll post up in a few

 

Here a pic of mine with a 90mm setup on it.

 

hell yeah guys, thanks for the pics... im sure i can make it work... if i trubs i migth be able to notch out the hood a tad. i need juice again though!!! i should be calling hsw next week to order !!

 

If it fits, you will not be disappointed! HSW has the best plate out there to date!

 

here is mine

 

Here's mine - fly by wire install . homemade N2O/Fuel solenoid plate.

 

I like that Saladbar. Thats pretty hidden to the unsuspectiong eye. I could see a ricer looking uder the hood and not catching it

 

nice setups!! i cant wait to get mine done!

 

I must agree, HSW is the best bang for the buck. But, i still need my damn cam installed . it's been almost a month and i'm going crazy, lol.

 

if clearance is a issue why not go with the money maker kit. it all fits inside the ls6 intake.

 

I ordered the kit today. Thanks Matt for the helpful service. I cant wait to install this kit!

 

looks pretty good Jeremy

 

does anyone have any pics of a normal install on a ls6 intake with the brackets that come with the kit?

had to turn the n2o bracket aound to manuver around the throttle cable. that sound right? maybe I am missing something.

also...how tight do i tighten the lines?

 

I just finished my install of the HSW Kit with a stock LS6 intake.
No problems. I still need a little clean up.

Bill