Lets see you Nitrous Switch Panels
The inside the cubby hole ones Tick performance and HSW sell. Tick says they can do custom, not sure what Matt and HSW can do for custom.
Keep in mind I am not a sponsor, just a "hobbiest" with an engraver. The sponsors make their living selling accessories, so get with them first. I like to stick to what I have done and do the full lighter style for the F-Bodies. PM me if you don't have any luck with sponsors.
Keep in mind I am not a sponsor, just a "hobbiest" with an engraver. The sponsors make their living selling accessories, so get with them first. I like to stick to what I have done and do the full lighter style for the F-Bodies. PM me if you don't have any luck with sponsors.
The evolution:
First Homemade sw panel for my '97 and was 1st panel in the Z06,
Same panel installed in the Z06,
2nd version of the above panel (prior to labels supplied by Beer),
3rd sw panel to go in,
Can't find the pic, lol.
4th panel, that now resides in a TTi X Z06,
5th and current panel and best to date,
The only installed pic I have, and yes we need a better from a slight distant pic,
Robert
First Homemade sw panel for my '97 and was 1st panel in the Z06,
Same panel installed in the Z06,
2nd version of the above panel (prior to labels supplied by Beer),
3rd sw panel to go in,
Can't find the pic, lol.
4th panel, that now resides in a TTi X Z06,
5th and current panel and best to date,
The only installed pic I have, and yes we need a better from a slight distant pic,
Robert
Teching In
Joined: Jul 2008
Posts: 10
Likes: 0
Not an ls, but it can give you ideas. My switch panel is attached to my headunit. The button has to be pressed on my headunit before the switches can be turned on the actual switch gauge, just as an extra added, safety.
these look great!! i9 love this thread....i just have to find out more about nitrous and find somebody who can hook it all up for me...i DONT DO ELECTRICAL WHAT sO EVER...and for $50 i think i saw it on a sponsors site ...that should do me just fine!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo well i have 4 on/off switches and a purge
n20
heater
purge
acc 1 --- master on/off
acc 2--- not used
I would like to have a master switch, that needs to be on 1st to turn on the others. i want to use the acc 1 as that switch.
could i run the keyed 12v to it and then the acc would be going to the 12 v prong on the other switches and a also ground it of corse.
also would i hook the power to the window switch, where i put it?
bad pic sorry
n20
heater
purge
acc 1 --- master on/off
acc 2--- not used
I would like to have a master switch, that needs to be on 1st to turn on the others. i want to use the acc 1 as that switch.
could i run the keyed 12v to it and then the acc would be going to the 12 v prong on the other switches and a also ground it of corse.
also would i hook the power to the window switch, where i put it?
bad pic sorry
Last edited by bad6as; Sep 3, 2008 at 07:08 PM.
Teching In
Joined: Mar 2007
Posts: 47
Likes: 0
i can get these made for damn near nothing...not as cute as the others, but gets the job done...this one is in my 87 Z. if anyone wants one, email me at timothy_5326@yahoo.com, and let me know what the dimensions are.
2000 SS M6, gear and tune, 12.97@110mph
1987 Z, 350, th350, lots of goodies...11.72@118mph
2000 SS M6, gear and tune, 12.97@110mph
1987 Z, 350, th350, lots of goodies...11.72@118mph
